Stirling · Scotland
Bath re-enamelling & resurfacing in Blairdrummond, Stirling
Fixed-price bath re-enamelling in Blairdrummond and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An old resurfacing that is failing
About our bath re-enamelling in Blairdrummond
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include chips and rust in more than one place and wear marks under the taps, across cast iron baths, pressed steel baths and acrylic baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Blairdrummond (FK9)
- Area hub
- Stirling
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Blairdrummond
Do you cover the entire of Stirling?
Across the UK, so Blairdrummond is covered. Prices don’t change with location.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
What happens next?
We come back with a fixed quote, plus dates. You are under no obligation.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
What a repair cannot fix
We will always be straight with you, so here’s what a repair cannot fix:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
About Blairdrummond
Blairdrummond is about 6 miles north-west of Stirling, in Stirling. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 55 places in Stirling, from the larger towns to small villages. We work right across the region, from Blairdrummond to Glasgow (23 miles away).
Our visits in FK9 work the same way as everywhere else we cover. We also cover the places around Blairdrummond: Menteith (1 mile north), Doune (1 mile north), Deanston (2 miles north-west), Gargunnock (3 miles south) and Dunblane (4 miles north-east). Larger places within reach include Stirling (6 miles south-east), St. Ninians (6 miles south-east), Raploch (5 miles south-east), Cornton (5 miles south-east), Torbrex (6 miles south-east) and Bridge of Allan (4 miles east).
Local landmarks in Blairdrummond
Locally, our jobs take us to homes close to St Lolan's Church And Burial Ground and the streets around them. For rail, the closest station is Dunblane station, about 3.5 miles east of the centre. Other landmarks nearby include Doune Motor Museum (3.5 miles north-west) and Doune Castle (1.2 miles north). For a walk, there’s Hill of Row and Loch Mahaick.
When to call us in Blairdrummond
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Send us a picture if you notice any of these:
- Lots of chips and rust spots
- A coloured bath you want in white
- An old resurfacing that is failing
- Thin, worn enamel in places
Comparing quotes
- What the guarantee covers, and for how long
- Whether they match the colour on site
- Who will actually do the work
- How to care for the finish
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Wipe the bath dry after use in hard water areas
- Do not leave a chip unrepaired
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take the best part of a day, tidy-up included.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
Ask for a price
If you’re in Blairdrummond and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Other services in Blairdrummond
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Why choose Surface Doctor in Blairdrummond
- Everything repaired in place
- Most jobs done in one visit
- We will tell you if it’s not worth repairing
- Repair technicians who travel to you, UK-wide
Take a look at our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
