Stirling · Scotland
Bath re-enamelling & resurfacing in Cornton, Stirling
Our repair technicians come to Cornton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Stains that will not shift
- A roll-top that is seen better days
Bath re-enamelling at your home in Cornton
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with a bath in a colour that no longer suits and chips and rust in more than one place, we can usually put it right.
Big or small, you get the same one-year guarantee.
- Location
- Cornton (FK9, FK8)
- Region
- Stirling
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
We work cleanly and quietly. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep a parking space free if you can
- Let us know about parking or access
- Open a window if you can
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
When we would advise against a repair
We will always be straight with you, so here’s what a repair will not do:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Common problems we fix in Cornton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The things clients normally mention when they call include:
- A roll-top that is seen better days
- Brown or grey marks that don’t clean off
- Enamel that’s lost its shine and feels rough
- An outdated colour you’d like to change
Before you book anyone
- What the guarantee covers, and for how long
- How long it needs to cure
- Whether they match the colour on site
- What aftercare is recommended
Our work in Cornton
Cornton is about 1 mile north of Stirling, in Stirling. Whether you’re in the middle of Cornton or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 55 towns and villages across Stirling, from the larger towns to small villages. We work right across the region, from Cornton to Glasgow (about 23 miles away).
Our visits in FK9 and FK8 are booked in the same way as anywhere else. Streets in the area include Haugh Road, Ochil Road and Haig Avenue, all of which we cover. Neighbouring places we cover include Raploch (1 mile south-west), Riverside (1 mile south-east), Causewayhead (1 mile east), Cambuskenneth (1 mile south-east) and Bridge of Allan (1 mile north). We also work in nearby towns such as Dunblane (4 miles north), Callander (13 miles north-west), Bannockburn (3 miles south), Broomridge (3 miles south), Cowie (5 miles south-east) and Plean (6 miles south-east). Cornton is one of the larger places we cover in Stirling.
What’s near Cornton
In Cornton, that means homes near Royal Gardens, Stirling and The William Wallace pub. The closest station to Cornton is Stirling station, about 1.1 miles south of the centre. Well-known places in the area include Stirling Health and Care Centre (1.9 miles south) and Stirling Castle (0.8 miles south-west). Not far away are Mote Hill and Airthrey Loch.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Towns and villages near Cornton
What else we do in Cornton
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why us?
- Straight answers about what a repair can do
- Typically one visit, start to finish
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- What the surface is made of
- Previous DIY repairs that have to come out
- Doing more than one item at once
- What kind of damage it is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- A wider photo showing the entire bath
- What it’s made of, if you know
- Natural light rather than flash
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Your questions about bath re-enamelling in Cornton
Do you cover the whole of Stirling?
We work UK-wide, so Cornton is covered. Our prices are the same everywhere.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you cover Cornton?
Yes. We cover the entire UK and come to Cornton. Send photos and we’ll quote, or call 0345 017 0787.
How much does bath re-enamelling cost in Cornton?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Keeping it looking good
Aftercare is simple:
- Don’t let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
