Liverpool · England
Bath Re-enamelling in Blundellsands
Full bath re-enamelling and resurfacing at your home in Blundellsands, with a one-year guarantee on every repair.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
Common problems we fix in Blundellsands
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, normally first under the taps and around the waste.
Get in touch if you’ve noticed any of these:
- Several chips and rust patches
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Comparing quotes
- What happens if the damage is worse than the photos show
- The length of the guarantee and what it covers
- What aftercare is recommended
- Who turns up on the day
How we handle bath re-enamelling in Blundellsands
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you are dealing with a period or roll-top bath worth keeping and a dull, rough surface that won’t come clean, we can normally put it right.
All of our repairs are guaranteed for twelve months in Blundellsands and everywhere else. If something goes wrong with the work, we come back.
- Where
- Blundellsands (L23, L22)
- Area hub
- Liverpool
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Other services in Blundellsands
What a repair cannot fix
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Blundellsands
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Landlord and trade work in Blundellsands
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a full day. We clean up when we’re done and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
How to prepare
- Tell us if there are stairs or a lift
- Make sure the area is dry
- Keep children and pets away from the room on the day
Ask for a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Advice
Blundellsands: your questions answered
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
How long is the bath unusable?
Generally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Do the materials smell?
There may be a mild smell during the work.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Blundellsands and nearby
Blundellsands is about 1 mile west of Crosby, in Liverpool. Wherever you are in the L23 postcode area, we carry out the work at your property. Blundellsands is one of 52 towns and villages in Liverpool where we work. Our nearest city page is Liverpool, about 8 miles away.
Every address in L23 and L22 is within our area. That includes homes on Ward Road, Weld Road and Agnes Road and the roads around them. If you are just outside Blundellsands, we cover Brighton-le-Sands (1 mile south-east), Crosby (1 mile east), Waterloo (1 mile south-east), Moor Park (1 mile east) and Seaforth (2 miles south-east). Larger places within reach include Liverpool (8 miles south-east), Everton (6 miles south-east), Orrell (3 miles south-east), Wavertree (8 miles south-east), Holy Land (8 miles south-east) and Tranmere (8 miles south).
Around Blundellsands
Around Blundellsands, we work in homes near Ursuline Catholic Primary School, Alexandra Park and Merchant Taylors' Girls' School and the streets around them. Other local landmarks include Blundellsands United Reformed Church (under half a mile south-east), The Royal Oak pub (0.6 miles south-east) and St Michael's Church of England High School (0.9 miles north-east). There is a railway station in Blundellsands itself: Blundellsands & Crosby station. Well-known places in the area include Clock View Hospital (4.2 miles south-east) and Marine Point (3.4 miles south). Open spaces near Blundellsands include Crosby Marina and Cabin Hill National Nature Reserve.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- What the surface is made of
- The colour and finish to match
- Access to the area
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- A close-up of the damage, in focus
- One picture of the whole bath
- What it’s made of, if you know
- Any earlier repairs or coatings
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Colour mixed on the day to match
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
- We leave the room as we found it
Read our prices page and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
