Liverpool · England
Bath re-enamelling & resurfacing in Moor Park, Liverpool
Bath re-enamelling in Moor Park without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- A roll-top that is seen better days
How we handle bath re-enamelling in Moor Park
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Our technicians work on cast iron baths, acrylic baths and basins & shower trays, and the jobs we see most are staining under the taps and around the waste and chips and rust in more than one place.
Big or small, you get the same one-year guarantee.
- Area
- Moor Park (L23, L72)
- County
- Liverpool
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
FAQs for Moor Park
How much does bath re-enamelling cost in Moor Park?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Does re-enamelling smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Common problems we fix in Moor Park
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
These are the problems we are asked about most:
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
- An outdated colour you’d like to change
Comparing quotes
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- How changes to the job are handled
How it works
We begin by going over the job with you. After that, protection goes down around the work area and we start. You can expect it to take a full day, and we will keep you posted as we go.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
How to get a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say right away if a repair is the right fix.
Advice
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before booking. We look at:
- How hard the colour is to match
- How much damage there is
- Access to the area
- Whether it’s a chip, crack, burn or wear
A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- One picture of the entire bath
For a price in Moor Park, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
What we cannot put right
We would rather lose a job than do one that will not last, so these are the limits:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Moor Park and nearby
Moor Park is about 1 mile north of Crosby, in Liverpool. From the centre of Moor Park to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 52 towns and villages across Liverpool. We work right across the region, from Moor Park to Liverpool (about 7 miles away).
Here we cover the L23 and L72 postcode area. Local streets include York Road, Moor Lane and Cooks Road, all of which we cover. We also travel to Crosby (1 mile south), Brighton-le-Sands (1 mile south-west), Blundellsands (1 mile west), Waterloo (2 miles south) and Seaforth (2 miles south). Larger places within reach include Liverpool (7 miles south-east), Everton (6 miles south), Wavertree (8 miles south-east), Holy Land (8 miles south), Tranmere (8 miles south) and Grassendale (11 miles south-east).
What’s near Moor Park
In Moor Park, that means homes near Alexandra Park, St Luke's Church and St Michael's Church of England High School. Other local landmarks include Great Crosby Catholic Primary School (0.5 miles south), Merchant Taylors' Girls' School (0.6 miles south-west) and The George pub (0.5 miles south-west). The closest station to Moor Park is Blundellsands & Crosby station, about 1.1 miles south-west. Well-known places in the area include Liverpool Scottish Regimental Museum (under half a mile south-east) and Clock View Hospital (3.7 miles south-east). Green spaces nearby include Cabin Hill National Nature Reserve and Crosby Marina.
Aftercare tips
So the finish stays in good condition:
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Towns and villages near Moor Park
Other services in Moor Park
About our accreditations · Every repair comes with a one-year guarantee.
