Hampshire · England
Bath re-enamelling & resurfacing in Bordon, Hampshire
Problem with your bath in Bordon? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- A dull, rough surface that won’t come clean
About our bath re-enamelling in Bordon
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. We regularly repair cast iron baths, Victorian roll-tops and acrylic baths, and common reasons people contact us are worn patches where water runs and sits and a bath in a colour that no longer suits.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Bordon (GU35)
- County
- Hampshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. There’s no charge for travel to Bordon. The price comes down to:
- Unusual colours or finishes
- What the surface is made of
- Previous DIY repairs that have to come out
- What kind of damage it is
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Before you send photos, these tips help us give you a firm price:
- Something in shot to show the size
- Details of any past repairs
- The postcode, so we can plan the visit
- Natural light rather than flash
Email us pictures of the damage and one of the whole item, with your GU35 postcode, and we’ll reply with a fixed price.
Your questions about bath re-enamelling in Bordon
How do I get a price for bath re-enamelling in Bordon?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Will there be a smell?
There may be a mild smell during the work.
How long will the bath be out of use?
One day for most baths, ready the next day. We give you timings with the quote.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Places near Bordon
Other services in Bordon
Common problems we fix in Bordon
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- A dull, rough surface that will not come clean
- An old resurfacing that is failing
- Wear marks under the taps
- Several chips and rust patches
Comparing quotes
- Aftercare advice
- What happens if the damage is worse than the photos show
- How the room is protected while they work
- When it can be used again
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Most jobs done in one visit
- One price list for the whole UK
- Technicians who travel to you, UK-wide
- One-year guarantee on every repair
Take a look at our prices page and bath cost comparison.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Looking after it afterwards
Nothing complicated is needed:
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- Never use suction bath mats
- Respect the curing time we give you
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Bordon and nearby
Bordon is about 10 miles south-west of Aldershot, in Hampshire. Across the GU35 area, a technician comes to you. Our technicians cover all 683 towns and villages across Hampshire. Our jobs stretch from Bordon to London (43 miles away).
Here we cover the GU35 postcode area. Whether you live on High Street, Station Road and Cobbett Square or anywhere nearby, we can come to you. You will find Bordon on the A325 and B3002, which makes it straightforward to reach. If you are just outside Bordon, we cover Pinewood Village (1 mile north), Deadwater (1 mile east), Whitehill (1 mile south), Lindford (1 mile north-east) and Hollywater (1 mile south-east). Further out, we also cover Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (5 miles north-west) and Petersfield (8 miles south-west).
Local landmarks in Bordon
In Bordon, that means homes near Bordon Infant School, St Mark's Sacred Church and Mill Chase Academy. The closest station to Bordon is Liphook station, about 4.1 miles south-east. Well-known places in the area include The Romany Museum (3.6 miles west) and Chase Community Hospital (0.6 miles south). Not far away are Selborne Hill and Deadwater Valley.
When a repair is not the answer
In fairness, some problems need a different fix:
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to the best part of a day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the next day.
How to prepare
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Let the surface dry out before the visit
Getting a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say immediately whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
