Hampshire · England
Bath re-enamelling & resurfacing in Hollywater, Hampshire
Local bath re-enamelling for Hollywater: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
Bath re-enamelling in Hollywater, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We regularly repair pressed steel baths, basins & shower trays and Victorian roll-tops, and people most often call us about an original cast iron bath that needs restoring and lots of chips and rust spots.
We stand behind the work with a one-year guarantee.
- Area
- Hollywater (GU35)
- County
- Hampshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Hollywater
Hollywater is about 6 miles south-east of Alton, in Hampshire. Whether you’re in the middle of Hollywater or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Hollywater is one of 683 towns and villages in Hampshire we cover. Our nearest city page is London, about 43 miles away.
Jobs in GU35 are booked in the same way as anywhere else. Jobs here include addresses on Hollywater Road and Liphook Road. Close by, we cover Standford (1 mile north-east), Whitehill (1 mile west), Deadwater (1 mile north), Bordon (1 mile north-west) and Lindford (1 mile north). Further out, we also cover Farnborough (14 miles north), Fleet (12 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (6 miles north-west) and Petersfield (8 miles south-west).
What’s near Hollywater
We visit homes around Mill Chase Academy, Woodlea Primary School and St Mark's Sacred Church. The closest station to Hollywater is Liphook station, roughly 3.1 miles south-east. Well-known places in the area include The Romany Museum (3.9 miles west) and Chase Community Hospital (0.6 miles north-west). Open spaces near Hollywater include Wheeler's Down and Deadwater Valley.
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Don’t use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What happens on the day
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. It typically takes the best part of a day, and you are welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Open a window if you can
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Hollywater customers choose us
- CHAS and Constructionline accredited
- No extra charge for your area
- No need to remove anything
- Honest advice, even when it means no job
Read our full price list and resurfacing vs replacement cost guide.
When to call us in Hollywater
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
The things clients typically mention when they call include:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
Comparing quotes
- How the colour is matched
- What happens if they find more damage
- When it can be used again
- A fixed quote, and whether VAT is included
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
When a repair is not the answer
We would rather lose a job than do one that will not last, so these are the limits:
- A bath that is rusted through
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Common questions in Hollywater
Can I get a quote without a visit?
Normally, yes. Clear photos let us give you a fixed price without visiting.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
What bath re-enamelling costs
Resurfacing from £350. We price every job individually, from your pictures. What matters most is:
- Whether old repairs or coatings need taking off
- The type of damage
- The colour and finish to match
- The size and number of damaged areas
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- Natural light rather than flash
- Any details about the material
- One picture of the whole bath
- Where you are, by postcode
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
Also in Hollywater
About our accreditations · Every repair comes with a one-year guarantee.
