Hampshire · England
Bath re-enamelling & resurfacing in Whitehill, Hampshire
Full bath re-enamelling and resurfacing in Whitehill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
Bath re-enamelling in Whitehill, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. Common call-outs are for a period or roll-top bath worth keeping and enamel that’s lost its shine and feels rough, on Victorian roll-tops, basins & shower trays and acrylic baths.
Every repair is covered by a one-year guarantee, wherever you are in Hampshire.
- Area
- Whitehill (GU35)
- Area hub
- Hampshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Whitehill
Landlords, letting agents and housing providers in Whitehill use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Prices start from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Why us?
- Nothing taken out or refitted
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your photos
See our prices page or guide to resurfacing and replacement costs.
What we are called out for in Whitehill
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Look out for any of the following:
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- Brown or grey marks that do not clean off
Comparing quotes
- Whether the colour is mixed to match
- Whether a trained technician does the job
- What happens if they find more damage
- What prep work is covered
Towns and villages near Whitehill
More services for Whitehill
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Keep a parking space free if you can
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Where we work around Whitehill
Whitehill is about 6 miles south-east of Alton, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 683 towns and villages across Hampshire. You can also see our page for London, about 43 miles away.
All of GU35 is within our area. You’ll find streets such as Stubbington Avenue, Petersfield Road and Dudley Close, all of which we cover. We also cover the places around Whitehill: Hollywater (1 mile east), Bordon (1 mile north), Deadwater (1 mile north-east), Pinewood Village (1 mile north) and Standford (1 mile east). Larger places within reach include Basingstoke (15 miles north-west), Farnborough (14 miles north), Fleet (12 miles north), Horndean (15 miles south-west), Aldershot (11 miles north-east) and Alton (6 miles north-west).
Landmarks near Whitehill
Our customers here include homes close to St Matthew's Church, Mill Chase Academy and Woodlea Primary School and the streets around them. The nearest railway station is Liphook station, about 3.7 miles south-east. Nearby you’ll also find The Romany Museum (3.2 miles west) and Chase Community Hospital (less than half a mile north-east). For a walk, there is Selborne Hill and Deadwater Valley.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Your questions about bath re-enamelling in Whitehill
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be a smell?
Expect a mild smell while we’re working.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you work in Whitehill?
We do. We send a technician to Whitehill for every job, and the price is the same as everywhere else.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
When we would advise against a repair
In fairness, some problems need a different fix:
- A bath split right through the body
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- How easy the damage is to reach
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Quotes from your photos
When you take your pictures, a few simple things make all the difference:
- Any details about the material
- One picture of the whole bath
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
