Hampshire · England
Bath Re-enamelling for Standford homes
Bath re-enamelling in and around Standford: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A coating lifting around the plughole
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- Any earlier repairs that need removing first
- Access to the area
- Unusual colours or finishes
- The size and number of damaged areas
Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- The material, if you know it
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Bath re-enamelling at your home in Standford
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We work on pressed steel baths, cast iron baths and acrylic baths, and common reasons people get in touch are thin, worn enamel in places and an old resurfacing that’s failing.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Standford (GU35)
- Area hub
- Hampshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Standford customers choose us
- One price list for the whole UK
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
See our prices page and guide to resurfacing and replacement costs.
Where we work around Standford
Standford is about 7 miles south-east of Alton, in Hampshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Standford is one of 683 places in Hampshire we cover. We work right across the region, from Standford to London (42 miles away).
Our technicians cover all of GU35. That includes homes on Robin Hood Gardens, Standford Lane and Tulls Lane. If you are just outside Standford, we cover Hollywater (1 mile south-west), Deadwater (1 mile north-west), Lindford (1 mile north-west), Headley (1 mile north-east) and Bordon (1 mile north-west). Larger places within reach include Farnborough (13 miles north), Fleet (12 miles north), Aldershot (10 miles north), Alton (7 miles north-west), Petersfield (8 miles south-west) and Hook (13 miles north-west).
Landmarks near Standford
Typical jobs here are in homes near St Mark's Sacred Church, Weyford Nursery and Primary School and Mill Chase Academy, among other places. The nearest railway station is Liphook station, roughly 2.9 miles south-east of the centre. Well-known places in the area include Chase Community Hospital (1.1 miles west). The countryside around Standford includes Wheeler's Down and Deadwater Valley.
More services for Standford
What a repair can’t fix
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- A bath that’s rusted through
- Leaks from fittings rather than the bath
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we’ll say what we think.
Materials we work on in Standford
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Signs you need bath re-enamelling in Standford
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
You may need us if you’ve spotted any of these:
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- Lots of chips and rust spots
Comparing quotes
- What happens if they find more damage
- Who will actually do the work
- Whether there are any call-out or travel charges
- What prep work is covered
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
How to care for the repair
Nothing complicated is needed:
- Avoid suction-cup mats
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
- Have chips seen to early
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we’re done and let you know when you can use it again.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Related advice
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Standford questions
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
About our accreditations · Every repair comes with a one-year guarantee.
