Somerset · England
Bath re-enamelling & resurfacing in Bossington, Somerset
Bath re-enamelling in Bossington without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Bath re-enamelling at your home in Bossington
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We’re frequently asked to fix several chips and rust patches and a coating lifting around the plughole, across cast iron baths, acrylic baths and basins & shower trays.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Bossington (TA24)
- Area hub
- Somerset
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Bossington
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Do you work in Bossington?
We do. We send a technician to Bossington for every job, with no extra charge for travel.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Do you cover the whole of Somerset?
All of Somerset, and the rest of the UK. There’s no extra charge for travel.
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- How hard the colour is to match
- How easy the damage is to reach
- How many items we do on one visit
- Whether old repairs or coatings need taking off
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- One sharp close-up of the damage
- Something in shot to show the size
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Bossington customers choose us
- We come to you, anywhere in the UK
- One price list for the entire UK
- Colour-matched on site
- A fixed quote before you book
Take a look at our prices page or bath cost comparison.
Do you need bath re-enamelling in Bossington?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Typical reasons for a call-out include:
- Wear marks under the taps
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
Comparing quotes
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- How the colour is matched
- What happens if the damage is worse than the photos show
What we do, step by step
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Ensure the room can be ventilated
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
Where we work around Bossington
Bossington is about 5 miles west of Minehead, in Somerset. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Bossington is one of 640 places in Somerset we cover.
We work across the TA24 postcode area and the streets around it. Nearby, we also work in Allerford (1 mile south-east), Porlock (1 mile south-west), Porlock Weir (2 miles west), Luccombe (2 miles south) and Bratton (3 miles east). Further out, we also cover Watchet (11 miles east), Williton (12 miles east), Dulverton (13 miles south) and Dunster (6 miles south-east).
Around Bossington
In Bossington, that means homes near St Dubricius Church of England VA School, Royal Oak pub and Lynch Chapel of Ease and the streets around them. A little further out are Exmoor Classic Car Museum (1 mile south-west). The countryside around Bossington includes Selworthy Beacon.
Honest limits
It helps to know what we can’t do:
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
- Do not leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
More services for Bossington
About our accreditations · Every repair comes with a one-year guarantee.
