Somerset · England
Bath Re-enamelling in Luccombe
We travel to Luccombe for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An old resurfacing that’s failing
- Brown or grey marks that don’t clean off
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Bath re-enamelling in Luccombe without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We are often asked to fix an original cast iron bath that needs restoring and a coating lifting around the plughole, on cast iron baths, Victorian roll-tops and pressed steel baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Luccombe (TA24)
- Region
- Somerset
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Luccombe
Luccombe is about 4 miles west of Minehead, in Somerset. Across the TA24 area, a technician comes to you. Luccombe is one of 640 towns and villages in Somerset where we work.
Our visits in TA24 work the same way as everywhere else we cover. Neighbouring places we cover include Allerford (2 miles north), Porlock (2 miles north-west), Bossington (2 miles north), Bratton (3 miles north-east) and Timberscombe (3 miles south-east). We also work in nearby towns such as Minehead (4 miles east), Watchet (10 miles east), Wiveliscombe (15 miles south-east), Williton (11 miles east), Dulverton (10 miles south) and Dunster (5 miles east).
Around Luccombe
Locally, our jobs take us to homes close to Church of St Mary and the streets around them. Nearby you’ll also find Exmoor Classic Car Museum (2.1 miles north-west). Not far away are Selworthy Beacon.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Luccombe. The price depends on:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- Access to the area
- What kind of damage it is
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
You can normally get a fixed price without us visiting. To help us price it:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- One picture of the whole bath
- Something in shot to show the size
Upload a photo of the damage and one of the entire item, with your TA24 postcode, and we’ll come back with a fixed quote.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What we cannot put right
To be straight with you, some problems need a different fix:
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Rinse off hair dye, oils and bath bombs straight away
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Signs you need bath re-enamelling in Luccombe
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
These are the problems we’re asked about most:
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
- Stains that won’t shift
- Several chips and rust patches
Before booking anyone
- Whether they match the colour on site
- Who turns up on the day
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
Nearby places to Luccombe
What else we do in Luccombe
Luccombe questions
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
How long is the bath unusable?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Do you cover the entire of Somerset?
We cover the entire UK, including Luccombe and the rest of Somerset. Send your postcode with your photos and we’ll offer you dates.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you work in Luccombe?
Yes. We cover the whole UK and come to Luccombe and the rest of Somerset. Send photos and we’ll quote, or call 0345 017 0787.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Repairing versus replacing in Luccombe
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
- Every repair guaranteed for a year
See our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
