Somerset · England
Bath Re-enamelling in Dulverton
Full bath re-enamelling and resurfacing for homes and businesses in Dulverton and across Somerset. Send photos for a free, fixed quote.
- Resurfacing from £350
- Staining under the taps and around the waste
- Thin, worn enamel in places
Bath re-enamelling in Dulverton without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with brown or grey marks that don’t clean off and lots of chips and rust spots, we can usually put it right.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Area
- Dulverton (TA22)
- Region
- Somerset
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Some jobs aren’t right for a repair, including:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
FAQs for Dulverton
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will there be a smell?
Expect a mild smell while we are working.
Can you repair something that is been repaired before?
Usually, yes. The old repair comes out first.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Towns and villages near Dulverton
Other services in Dulverton
Do you need bath re-enamelling in Dulverton?
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
What your quote should include
- Whether a trained technician does the job
- Aftercare advice
- How soon you can use it again
- What happens if they find more damage
What bath re-enamelling costs
Resurfacing from £350. There’s no area surcharge for Dulverton. The price reflects:
- Unusual colours or finishes
- How much damage there is
- Previous DIY repairs that have to come out
- Doing more than one item at once
Our prices are the same across the UK, so there’s no premium for Dulverton. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- Something in shot to show the size
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
How to care for the repair
Most damage we see is avoidable. A few tips:
- Repair dripping taps early
- Don’t use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Landlord and trade work in Dulverton
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Where we work around Dulverton
Dulverton is about 10 miles north of Tiverton, in Somerset. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We work in all 640 towns and villages across Somerset, from the larger towns to small villages.
Postcode districts we cover here: TA22. Jobs here include addresses on High Street, Hollam Drive and Fishers Mead. Dulverton sits on or near the B3222 and B3223, so getting to you is simple. We also cover the places around Dulverton: Brushford (1 mile south), Bury (2 miles east), Morebath (3 miles south-east), Waddicombe (3 miles west) and Brompton Regis (3 miles north-east). Further out, we also cover Minehead (12 miles north), Wellington (14 miles east), Watchet (13 miles north-east), Wiveliscombe (10 miles east), Williton (13 miles north-east) and Rockwell Green (14 miles east).
Local landmarks in Dulverton
Our customers here include homes close to Woods pub, All Saints CofE VC Infants School and Church of All Saints and the streets around them. A little further out are Brewer's Castle (2.5 miles north-west). Green spaces nearby include Wimbleball Lake.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
What happens on the day
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
How to get a price
Send us a picture of the damage and one of the entire item, with your TA22 postcode, and we will come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
