Buckinghamshire · England
Bath re-enamelling & resurfacing in Bourne End, Buckinghamshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Bourne End. Send photos for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Stains that won’t shift
What we can’t put right
We will always be straight with you, so here’s what a repair cannot fix:
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
Send us pictures and we will tell you honestly before booking.
Materials we work on in Bourne End
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Bath re-enamelling in Bourne End, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. We are frequently asked to fix an original cast iron bath that needs restoring and wear marks under the taps, in basins & shower trays, acrylic baths and pressed steel baths.
All our work is covered by a one-year guarantee, wherever you are in Buckinghamshire.
- Area
- Bourne End (SL8)
- Region
- Buckinghamshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Nearby places to Bourne End
More services for Bourne End
What we are called out for in Bourne End
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, normally first under the taps and around the waste.
Most people get in touch when they notice something like this:
- Stains that will not shift
- An outdated colour you’d like to change
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
Questions to ask before booking
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- How changes to the job are handled
- Whether the price covers travel
About Bourne End
Bourne End is about 3 miles east of Marlow, in Buckinghamshire. We travel to clients in Bourne End, so there is no workshop to go to. Bourne End is one of 263 towns and villages in Buckinghamshire we cover. Our nearest city page is London, about 27 miles away.
Every address in SL8 is covered. Local streets include Station Road, Highfield Road and Brent Road, and we cover them all. Bourne End is on the A4094, so it’s easy for us to reach. Other places close to Bourne End include Cores End (1 mile east), Well End (1 mile north-west), Coldmoorholme (1 mile west), Fern (1 mile north-west) and Flackwell Heath (1 mile north). Larger places within reach include High Wycombe (4 miles north-west), Chesham (10 miles north-east), Marlow (3 miles west), Amersham (8 miles north-east), Beaconsfield (3 miles north-east) and Chalfont St Peter (7 miles east).
Landmarks near Bourne End
Our clients here include homes close to St Mark, Wye Valley School and The Bounty pub. There’s a railway station in Bourne End itself: Bourne End station. Well-known places in the area include Marlow Community Hospital (2.6 miles west) and High Wycombe Castle (3.9 miles north-west). Green spaces nearby include Warren Nature Reserve and Taplow Lake.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
FAQs for Bourne End
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How much does bath re-enamelling cost in Bourne End?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you quote from photos?
Typically, yes. Clear photos let us give you a fixed price without visiting.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one.
What affects the price in Bourne End
Prices start from £350. We do not charge extra for travel to Bourne End. The price depends on:
- The material
- How many items we do on one visit
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
You can take the pictures on your phone. Make sure they show:
- A clear, close picture of the problem area
- A photo taken from further back
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What we do, step by step
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
- Point us to the nearest place to park
How to get a price
To get a price, send two or three photos using our quote form or call us. We’ll say immediately if a repair is the right fix.
Related advice
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- Same prices wherever you are
- Fixed prices from your pictures
- Dust sheets down, tidy finish
- Typically one visit, start to finish
Read our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
