Buckinghamshire · England
Bath Re-enamelling in Little Marlow
Bath re-enamelling across Little Marlow and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Stains that won’t shift
About our bath re-enamelling in Little Marlow
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. We regularly repair acrylic baths, pressed steel baths and Victorian roll-tops, and common reasons people contact us are a bath in a colour that no longer suits and lots of chips and rust spots.
Big or small, you get the same one-year guarantee in Little Marlow and across Buckinghamshire.
- Area
- Little Marlow (SL7)
- County
- Buckinghamshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Little Marlow?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Free fixed quotes from pictures
- One-year guarantee on every repair
- Rooms protected and left tidy
- No extra charge for your area
Take a look at our prices page and guide to resurfacing and replacement costs.
Nearby places to Little Marlow
What else we do in Little Marlow
When we would advise against a repair
In fairness, there are a few things a repair won’t fix:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
What we work on
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
How it works
Here’s how a visit normally runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow the best part of a day. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Point us to the nearest place to park
- Open a window if you can
- Let us know about parking or access
Getting a price
To get a price, send two or three pictures using our quote form or ring us. We’ll say immediately if a repair is the right fix.
Related advice
When to call us in Little Marlow
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
People generally call us when they notice something like this:
- A peeling or bubbling previous coating
- Several chips and rust patches
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
Comparing quotes
- How to care for the finish
- What prep work is covered
- Whether the price covers travel
- Whether the colour is mixed to match
Little Marlow questions
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do you charge for travel?
We don’t add a call-out fee. Your fixed price includes everything.
Can you quote from pictures?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
Aftercare tips
To keep it looking its best for years:
- Never use suction bath mats
- Store bottles off the bath
- Don’t use the bath until it has fully cured
- Don’t let dyes or oils sit on the finish
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Where we work around Little Marlow
Little Marlow is about 2 miles north-east of Marlow, in Buckinghamshire. Jobs in Little Marlow are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover 263 places in Buckinghamshire. Our nearest city page is London, about 28 miles away.
Every address in SL7 is covered. You’ll find streets such as Church Road, Pound Lane and School Lane. We also cover the places around Little Marlow: Fern (1 mile north-east), Coldmoorholme (1 mile east), Well End (1 mile east), Burroughs Grove (1 mile north-west) and Bourne End (1 mile east). We also work in nearby towns such as High Wycombe (3 miles north), Chesham (10 miles north-east), Amersham (9 miles north-east), Beaconsfield (4 miles north-east), Chalfont St Peter (8 miles east) and Princes Risborough (10 miles north).
What’s near Little Marlow
Around Little Marlow, we work in homes near Great Marlow School, Church of St John the Baptist and Little Marlow CofE School and the streets around them. For rail, the closest station is Bourne End station, roughly 1.4 miles east. Further afield, we also cover the area around High Wycombe Castle (3.3 miles north) and Eden (3.2 miles north). Not far away are Taplow Lake and Warren Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
