Staffordshire · England
Bath Re-enamelling in Bramshall
Bath re-enamelling in and around Bramshall: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Bramshall
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include enamel that’s lost its shine and feels rough and an outdated colour you’d like to change, on acrylic baths, pressed steel baths and cast iron baths.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Location
- Bramshall (ST14)
- Region
- Staffordshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Bramshall
Do you cover the whole of Staffordshire?
We cover the whole UK, including Bramshall and the rest of Staffordshire. Send your postcode with your photos and we will confirm dates.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we will ask for another angle.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
How much does bath re-enamelling cost in Bramshall?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
Are there extra charges for Bramshall?
Travel is included in the price, and we charge the same wherever you are.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the next day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
- Tell us if there are stairs or a lift
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Our prices are the same across the UK, so there’s no premium for Bramshall. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Bramshall
- No extra charge for your area
- Nothing taken out or refitted
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
Take a look at our full price list and bath cost comparison.
Common problems we fix in Bramshall
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Contact us if you’ve noticed:
- Enamel that is lost its shine and feels rough
- A coloured bath you want in white
- Staining under the taps and around the waste
- A coating lifting around the plughole
What to look for in a quote
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
- What prep work is covered
- Who turns up on the day
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wash away dyes and oils after use
- Never use suction bath mats
- A quick wipe after use keeps limescale away
- Repair dripping taps early
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Our work in Bramshall
Bramshall is about 2 miles west of Uttoxeter, in Staffordshire. From the centre of Bramshall to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 512 towns and villages across Staffordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 30 miles away.
Here we cover the ST14 postcode area. Local streets include Overcroft, Oakden Close and Mallens Croft. We also cover the places around Bramshall: Leese Hill (2 miles south), Loxley Green (2 miles south), Gratwich (2 miles south-west), Kingstone (2 miles south) and The Blythe (3 miles south). We also work in nearby towns such as Stafford (11 miles south-west), Burton upon Trent (13 miles south-east), Cannock (14 miles south), Lichfield (15 miles south), Longton (11 miles north-west) and Rugeley (10 miles south).
Local landmarks in Bramshall
Typical jobs here are in homes near Church of St Lawrence and Oldfields Hall Middle School and the streets around them. The closest station to Bramshall is Uttoxeter station, about 2.2 miles east. Nearby you’ll also find Chartley Castle (4.4 miles south-west) and Redfern's Cottage (1.8 miles east).
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Nearby places to Bramshall
Also in Bramshall
Landlords, agents and businesses in Bramshall
We work for landlords, letting agents and housing providers in Bramshall as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- A bath split right through the body
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we will say what we think.
Materials we work on in Bramshall
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
