Norfolk · England
Bath Re-enamelling for Breckles homes
Full bath re-enamelling and resurfacing in Breckles, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- A peeling or bubbling previous coating
Repair or replace: which is better?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- Most jobs done in one visit
- No need to remove anything
- We come to you, anywhere in the UK
- We leave the room as we found it
Read our full price list or resurfacing vs replacement cost guide.
Bath re-enamelling in Breckles, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. If you are dealing with stains that won’t shift and a dull, rough surface that won’t come clean, we can help, whatever the material.
Every job is backed for twelve months in Breckles and everywhere else. If something goes wrong with the work, we come back.
- Area
- Breckles (NR17, IP24)
- Area hub
- Norfolk
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Breckles
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Look out for any of the following:
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
Comparing quotes
- Aftercare advice
- What happens if the damage is worse than the photos show
- Who will actually do the work
- Whether the colour is mixed to match
About Breckles
Breckles is about 5 miles south-east of Watton, in Norfolk. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 797 towns and villages in Norfolk.
Postcode districts we cover here: NR17 and IP24. Close by, we cover Stow Bedon (1 mile north), Caston (2 miles north), Thompson (3 miles north-west), Northacre (3 miles north) and Griston (3 miles north). We also work in nearby towns such as Thetford (8 miles south-west), Dereham (12 miles north), Wymondham (11 miles north-east), Attleborough (5 miles east), Watton (5 miles north-west) and Hethersett (14 miles north-east).
Landmarks near Breckles
Our clients here include homes close to Church of St Margaret, Great Hockham Primary School and Nursery and Great Eastern Pingo Trail and the streets around them. For rail, the closest station is Harling Road station, roughly 4 miles south of the centre. A little further out are Bickley Day Hospital (5.8 miles east). The countryside around Breckles includes Thompson Water.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Also in Breckles
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Never use suction bath mats
- Wash away dyes and oils after use
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Your questions about bath re-enamelling in Breckles
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is there any odour?
There may be a mild smell during the work.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Landlord and trade work in Breckles
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Breckles. The price depends on:
- How much damage there is
- The material and finish
- Whether we combine several jobs
- Previous DIY repairs that have to come out
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Where you are, by postcode
- Natural light rather than flash
- The material, if you know it
- Details of any past repairs
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
