Surrey · England

Bath Re-enamelling for Brick Hill homes

Problem with your bath in Brick Hill? We repair it in place, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • Wear marks under the taps
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Brick Hill

Landlord and trade work in Brick Hill

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Bath re-enamelling at your home in Brick Hill

Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. Our technicians work on cast iron baths, pressed steel baths and basins & shower trays, and people most frequently call us about staining under the taps and around the waste and lots of chips and rust spots.

Whatever the size of the job, you get the same one-year guarantee in Brick Hill and across Surrey.

Area
Brick Hill (GU24)
Region
Surrey
Cover
One year on every repair
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026
Before and after: an old basin refinished to bright white

Should you replace it?

For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Brick Hill

  • Every repair guaranteed for a year
  • Technicians who travel to you, UK-wide
  • Everything repaired in place
  • Rooms protected and left tidy

Take a look at our pricing or resurfacing vs replacement cost guide.

What we do, step by step

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. It normally takes most of the day.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the day after.

Before we arrive

  • Ensure the room can be ventilated
  • Keep a parking space free if you can
  • Let us know which floor the room is on

Getting a price

Upload photos of the damage and a wider shot of the whole item, and tell us you are in Brick Hill, and we’ll reply with a fixed quote.

Get a free quote

Related advice

Common questions in Brick Hill

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can I get a quote without a visit?

Usually, yes. Clear photos let us give you a fixed price without visiting.

Do you come to Brick Hill?

Yes. We cover the entire UK and travel to Brick Hill. Send pictures and we’ll quote, or call 0345 017 0787.

Which areas do you work in?

The whole UK, including all of Surrey. Just include your postcode and we will offer you dates.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Does the bath have to be removed?

No. We resurface it in place, so nothing else is disturbed.

Does re-enamelling smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

What a repair cannot fix

Some jobs are not right for a repair, including:

  • Steel that has corroded right through
  • Anything hidden under an old coating, until we remove it
  • Plumbing leaks, which need a plumber

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths

Looking after it afterwards

Most damage we see is avoidable. These habits help:

  • Avoid suction-cup mats
  • Wash away dyes and oils after use
  • Wipe the bath dry after use in hard water areas
  • Get any chip repaired quickly

Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.

Don’t try to scrub a worn bath back to shine. It removes more of the surface.

What bath re-enamelling costs

Prices start from £350. We charge the same across the UK, including Brick Hill. What changes the price is:

  • What the surface is made of
  • Whether we combine several jobs
  • How easy the damage is to reach
  • How many areas need work

The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.

Getting a price from photos

You can take the pictures on your phone. Just make sure we can see:

  • What it’s made of, if you know
  • One picture of the entire bath
  • Natural light rather than flash
  • Where you are, by postcode

To get a price, send two or three pictures using our quote form or ring us. We will say immediately whether it can be repaired.

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

Our work in Brick Hill

Brick Hill is about 5 miles north-west of Woking, in Surrey. Our repair technicians come to homes and businesses in Brick Hill, so there’s no workshop to go to. Our repair technicians cover all 395 towns and villages in Surrey. We work right across the region, from Brick Hill to London (25 miles away).

We work across GU24 and the streets around it. We also cover the places around Brick Hill: Broomhall (1 mile north), Windlesham (1 mile west), Chobham (2 miles south-east), Sunningdale (2 miles north) and Coxhill Green (2 miles south-east). Within a short drive, we also cover Guildford (9 miles south), Woking (5 miles south-east), Camberley (5 miles south-west), Farnham (13 miles south-west), Egham (5 miles north-east) and Walton-on-Thames (9 miles east).

Landmarks near Brick Hill

Our clients here include homes close to Charters School, The Brickmakers pub and Valley End CofE Infant School, among other places. You’ll also find Church of St Saviour (0.6 miles south) and Gracious Pond (2 miles east). The closest station to Brick Hill is Sunningdale station, roughly 1.3 miles north of the centre. Other landmarks nearby include Chobham Museum (2 miles south-east) and Heatherwood Hospital (3.6 miles north-west). The countryside around Brick Hill includes St Ann's Hill and Virginia Water Lake.

Map of Brick Hill © OpenStreetMap contributors

Repairs by material

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.