Surrey · England
Bath Re-enamelling for Penny Pot homes
Local bath re-enamelling for Penny Pot: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots

The process
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
- Let us know about parking or access
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Bath re-enamelling in Penny Pot without replacing anything
The bath stays where it is, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. Common call-outs are for wear marks under the taps and a bath in a colour that no longer suits, on Victorian roll-tops, acrylic baths and pressed steel baths.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Penny Pot (GU24)
- Region
- Surrey
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026

Honest limits
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- A bath that is rusted through
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
What we are called out for in Penny Pot
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
It’s worth getting a quote if you see:
- Worn patches where water runs and sits
- Lots of chips and rust spots
- An outdated colour you’d like to change
- A roll-top that is seen better days
Comparing quotes
- Who turns up on the day
- Whether the price covers travel
- Whether they match the colour on site
- How the room is protected while they work
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Unusual colours or finishes
- Access to the area
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- One sharp close-up of the damage
To get a price, send a couple of photos using our quote form or call us. We will tell you honestly whether it can be repaired.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Where we work around Penny Pot
Penny Pot is about 3 miles north-west of Woking, in Surrey. Across the GU24 area, we carry out the work at your property. Penny Pot is one of 395 towns and villages in Surrey where we work. Our nearest city page is London, about 25 miles away.
Our repair technicians cover all of GU24. Other places close to Penny Pot include Castle Green (1 mile south-east), West End (1 mile west), Coxhill Green (1 mile north-east), Chobham (1 mile north-east) and Bisley (1 mile south-west). Further out, we also cover Guildford (7 miles south), Woking (3 miles south-east), Camberley (5 miles west), Epsom (15 miles east), Farnham (12 miles south-west) and Egham (7 miles north-east).
Around Penny Pot
Around Penny Pot, we work in homes near Church of St Lawrence, The Sun Public House and Gordon's School. Other local landmarks include Holy Trinity CofE Primary School (0.6 miles west) and Milford Green and Coxhill Green (1.4 miles east). For rail, the closest station is Brookwood station, roughly 2.7 miles south. Well-known places in the area include Brookwood Hospital (1.8 miles south) and The Peacocks (3 miles south-east). Not far away are Virginia Water Lake and Gracious Pond.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Common questions in Penny Pot
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
What happens once I’ve sent photos?
You’ll get a fixed quote back, plus dates. There is no obligation to book.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Surrey.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Nearby places to Penny Pot
Other services in Penny Pot
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.

