Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Bridge of Cally, Perth and Kinross
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Bridge of Cally. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Bridge of Cally. The price reflects:
- The type of damage
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- What the surface is made of
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed price
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- Any earlier repairs or coatings
- Something in shot to show the size
- What it’s made of, if you know
- Where you are, by postcode
Most clients in Bridge of Cally get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Bath re-enamelling in Bridge of Cally without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include an outdated colour you’d like to change and staining under the taps and around the waste, on Victorian roll-tops, basins & shower trays and cast iron baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Bridge of Cally (PH10)
- County
- Perth and Kinross
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Bridge of Cally
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Typical reasons for a call-out include:
- An old resurfacing that’s failing
- Worn patches where water runs and sits
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
What your quote should include
- A fixed quote, and whether VAT is included
- What happens if they find more damage
- How soon you can use it again
- What preparation is included
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Rinse off hair dye, oils and bath bombs straight away
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Covering Bridge of Cally
Bridge of Cally is about 5 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Whether you’re in the middle of Bridge of Cally or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 107 towns and villages across Perth and Kinross, from the larger towns to small villages. You can also see our page for Edinburgh, about 49 miles away.
We cover every part of the PH10 postcode area. We also travel to Netherton (1 mile north), Kinloch (4 miles south), Blairgowrie and Rattray (5 miles south-east), Rattray (5 miles south-east) and Carsie (6 miles south). Further out, we also cover Pitlochry (13 miles west), Alyth (7 miles east), Coupar Angus (9 miles south-east), Stanley (12 miles south), Luncarty (14 miles south) and Newtyle (12 miles south-east).
Landmarks near Bridge of Cally
We visit homes around Netherton Church. Further afield, we also cover the area around Blairgowrie Community Hospital (4.8 miles south-east) and Blackcraig Castle (2.4 miles north-west). Green spaces nearby include Loch Charles.
Places near Bridge of Cally
More services for Bridge of Cally
What a repair can’t fix
We won’t take on work that will not last, so these are the limits:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Bridge of Cally
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Repair or replace in Bridge of Cally?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why Bridge of Cally clients choose us
- Dust sheets down, tidy finish
- No extra charge for your area
- Colours mixed by hand to suit your surface
- Straight answers about what a repair can do
Read our full price list or resurfacing vs replacement cost guide.
The process
We agree an arrival time beforehand, so you are not left guessing. On site, it takes the best part of a day in most cases. The room is left tidy and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Make sure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
Ask for a price
If you’re in Bridge of Cally and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
FAQs for Bridge of Cally
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your photos and you’ll get one combined price.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Perth and Kinross.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
