Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Kirkmichael, Perth and Kinross
Bath re-enamelling for Kirkmichael, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
About our bath re-enamelling in Kirkmichael
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s a coloured bath you want in white and a coating lifting around the plughole, we can usually put it right, on pressed steel baths, basins & shower trays and acrylic baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Kirkmichael (PH10)
- Region
- Perth and Kinross
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. You will not pay by the hour. The price is based on:
- The size and number of damaged areas
- The material
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
We charge the same wherever you are, so there is no premium for Kirkmichael. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A photo taken from further back
Email us a photo of the damage and a wider shot of the whole item, with your PH10 postcode, and we’ll come back with a fixed quote.
Common questions in Kirkmichael
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
What we cannot put right
Some jobs aren’t right for a repair, including:
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
How to care for the repair
So the finish stays in good condition for years:
- Don’t use the bath until it has fully cured
- Get any chip repaired quickly
- Never use suction bath mats
- Do not leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Nearby places to Kirkmichael
What else we do in Kirkmichael
Should you replace it?
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why Kirkmichael clients choose us
- We leave the room as we found it
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
See our pricing or resurfacing vs replacement cost guide.
Covering Kirkmichael
Kirkmichael is about 11 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 107 towns and villages across Perth and Kinross, from the larger towns to small villages. Our jobs stretch from Kirkmichael to Edinburgh (about 55 miles away).
All of PH10 is covered. Local streets include Sillerburn, Whitefield View and Balnald. Being close to the A924, Kirkmichael is simple for us to get to. Neighbouring places we cover include Netherton (6 miles south-east), Bridge of Cally (7 miles south-east), Spittal of Glenshee (7 miles north), Ballinluig (8 miles south-west) and Logierait (8 miles south-west). Larger places within reach include Blairgowrie and Rattray (11 miles south-east), Pitlochry (8 miles west), Alyth (13 miles south-east), Coupar Angus (15 miles south-east), Rattray (11 miles south-east) and Aberfeldy (15 miles south-west).
What’s near Kirkmichael
Typical jobs here are in homes near Duff Memorial Church, among other places. Nearby you’ll also find Blackcraig Castle (4.5 miles south-east). Open spaces near Kirkmichael include Lochan Oisinneach Beag.
The process
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. You can expect it to take a full day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Do you need bath re-enamelling in Kirkmichael?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Look out for these signs:
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
- A coloured bath you want in white
- Worn patches where water runs and sits
What your quote should include
- A fixed price, and whether VAT is included
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
