Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Carsie, Perth and Kinross
Full bath re-enamelling and resurfacing in Carsie, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
About our bath re-enamelling in Carsie
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair acrylic baths, pressed steel baths and cast iron baths, and people most often call us about a bath that stays dull however much you clean it and a bath in a colour that no longer suits.
Big or small, you get the same one-year guarantee.
- Where
- Carsie (PH10)
- Region
- Perth and Kinross
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Don’t let dyes or oils sit on the finish
- Have chips seen to early
- Clean with a soft cloth and mild detergent
- Don’t leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Covering Carsie
Carsie is about 2 miles south of Blairgowrie and Rattray, in Perth and Kinross. From the centre of Carsie to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 107 places in Perth and Kinross. Our jobs stretch from Carsie to Edinburgh (43 miles away).
Our visits in PH10 work the same way as everywhere else we cover. Whether you live on Pine Grove, Blackloch Crescent and Fraser Avenue or anywhere nearby, a technician can come to you. Close by, we cover Blairgowrie and Rattray (2 miles north), Rattray (2 miles north-east), Kinloch (2 miles north-west), Meikleour (2 miles south-west) and Coupar Angus (3 miles south-east). Further out, we also cover Perth (12 miles south), Letham (12 miles south-west), Scone (10 miles south), Tulloch (12 miles south-west), Alyth (6 miles north-east) and Oakbank (13 miles south).
Landmarks near Carsie
We visit homes around Blairgowrie High School, among other places. Nearby you’ll also find Blairgowrie Community Hospital (1.3 miles north) and Lethendy House (2 miles west). Open spaces near Carsie include Black Loch.
When we would advise against a repair
It helps to know what we cannot do:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly.
Materials we work on in Carsie
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow the best part of a day. Before leaving, we tell you when it can be used and how to care for it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Before we arrive
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Ask for a price
To get a price, send a couple of photos using our quote form or call us. We will say immediately whether it can be repaired.
Read more
Why repair rather than replace?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why choose Surface Doctor in Carsie
- Fixed prices from your pictures
- Work done at your home or business
- Straight answers about what a repair can do
- Most jobs done in one visit
Take a look at our pricing or guide to resurfacing and replacement costs.
Common questions in Carsie
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Do you cover the entire of Perth and Kinross?
Everywhere in the UK, Carsie included. There is no extra charge for travel.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Nearby places to Carsie
More services for Carsie
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- How many items we do on one visit
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
You can take the pictures on your phone. Just ensure we can see:
- A coin or ruler next to the damage for scale
- One picture of the entire bath
- Details of any past repairs
- Any details about the material
Upload a photo of the damage and one of the whole item, with your PH10 postcode, and we’ll reply with a fixed price.
Landlords, agents and businesses in Carsie
Housing associations and facilities teams use us for planned and reactive repairs in Perth and Kinross and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For anyone letting property in or around Carsie, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
