Wirral · England
Bath re-enamelling & resurfacing in Raby Mere, Wirral
Bath re-enamelling for Raby Mere, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
About our bath re-enamelling in Raby Mere
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on pressed steel baths, acrylic baths and Victorian roll-tops, and common reasons people contact us are a peeling or bubbling previous coating and lots of chips and rust spots.
Every repair is covered by a one-year guarantee.
- Where
- Raby Mere (CH63)
- Region
- Wirral
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Raby Mere questions
How long is the bath unusable?
Usually one day, with the bath ready the following day. A badly pitted bath can need a second day.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Do you work in Raby Mere?
We do. We send a technician to Raby Mere for every job, and the price is the same as everywhere else.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a picture of the whole item with your CH63 postcode.
Also near Raby Mere
More services for Raby Mere
What affects the price in Raby Mere
Resurfacing from £350. There’s no area surcharge for Raby Mere. The price reflects:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- How easy the damage is to reach
- What the surface is made of
We charge the same wherever you are, so there’s no premium for Raby Mere. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed quote
Before you send pictures, these tips help us give you a firm price:
- One picture of the entire bath
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Where you are, by postcode
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Raby Mere and nearby
Raby Mere is about 1 mile south-west of Bromborough, in Wirral. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We work in all 44 towns and villages across Wirral, from the larger towns to small villages. We work right across the region, from Raby Mere to Liverpool (about 7 miles away).
All of CH63 is covered. Whether you live on Mere Avenue, Raby Avenue and Lawns Avenue or a nearby road, a technician can come to you. If you are just outside Raby Mere, we cover Bromborough (1 mile north-east), Bebington (2 miles north), Eastham (2 miles east), Eastham Ferry (2 miles east) and Bromborough Pool (2 miles north). Larger places within reach include Birkenhead (5 miles north-west), Wallasey (7 miles north), Heswall (4 miles west), Moreton (7 miles north-west), West Kirby (8 miles north-west) and Greasby (7 miles north-west).
Local landmarks in Raby Mere
Around Raby Mere, we work in homes near South Wirral High School, The Merebrook pub and Chapel of Saint Peter. Other local landmarks include Marfords Park (within half a mile north-east) and Brookhurst Primary School (within half a mile east). The nearest railway station is Bromborough station, about 0.5 miles east. Further afield, we also cover the area around Clatterbridge Hospital (1.4 miles north-west) and Port Sunlight Museum (2.3 miles north). Not far away are New Ferry Butterfly Park and Princes Park lake.
- Other local spots include Municipal Borough of Bebington (2.1 miles north)
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
When we would advise against a repair
A repair is not right for every job, for example:
- A bath that is rusted through
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Raby Mere
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Looking after it afterwards
So the finish stays in good condition:
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Do not leave a chip unrepaired
- A dripping tap should be fixed promptly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
When to call us in Raby Mere
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Send us a photo if you notice any of these:
- Stains that won’t shift
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
What your quote should include
- Whether the colour is mixed to match
- How your room will be protected
- Who will actually do the work
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
