Wirral · England
Bath Re-enamelling in Bromborough Pool
Local bath re-enamelling for Bromborough Pool: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Let us know about parking or access
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you are under no obligation.
Advice
Bath re-enamelling at your home in Bromborough Pool
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Typical jobs include thin, worn enamel in places and an original cast iron bath that needs restoring, in cast iron baths, Victorian roll-tops and basins & shower trays.
Every job is backed for twelve months in Bromborough Pool and everywhere else. We return to put right any problem with the work.
- Area
- Bromborough Pool (CH62)
- County
- Wirral
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Bromborough Pool
Also in Bromborough Pool
Where we work around Bromborough Pool
Bromborough Pool is about 1 mile north-east of Bebington, in Wirral. We travel to customers in Bromborough Pool, so there’s no workshop to go to. Our technicians cover all 44 towns and villages in Wirral.
We work across the CH62 postcode area. Streets in the area include Pool Lane, Thermal Road and Dock Road South, and we cover them all. Neighbouring places we cover include Port Sunlight (1 mile north-west), Bebington (1 mile south-west), Bromborough (1 mile south), Eastham Ferry (2 miles south-east) and Aigburth (2 miles north-east). Further out, we also cover Birkenhead (4 miles north-west), Wallasey (5 miles north-west), Heswall (5 miles west), Moreton (6 miles north-west), West Kirby (8 miles west) and Greasby (6 miles west).
What’s near Bromborough Pool
Locally, our jobs take us to homes close to Wellington School, St John Plessington Catholic College and Village pub and the streets around them. You will also find Port Sunlight River Park (0.5 miles north), St Matthew's Church (under half a mile east) and Church Drive Primary School (0.7 miles west). The closest station to Bromborough Pool is Port Sunlight station, about 0.8 miles west. Nearby you will also find Liverpool One (3.7 miles north) and Clatterbridge Hospital (2.2 miles south-west). The countryside around Bromborough Pool includes New Ferry Butterfly Park and Princes Park lake.
- Local facilities include Municipal Borough of Bebington (0.9 miles west)
Bromborough Pool questions
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Which areas do you work in?
The whole UK, including all of Wirral. Just include your postcode and we’ll offer you dates.
Do you work in Bromborough Pool?
Yes. We cover the whole UK and come to Bromborough Pool and the rest of Wirral. Send us photos for a fixed quote, or call 0345 017 0787.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Repairing versus replacing in Bromborough Pool
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the day after. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
Take a look at our prices page or bath cost comparison.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Prices and what affects them
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- The size and number of damaged areas
- How many items we do on one visit
- How hard the colour is to match
- How easy the damage is to reach
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
Two or three clear pictures are generally enough. Try to include:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Don’t let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What we are called out for in Bromborough Pool
Often the bath has just had decades of use. The body of the bath is normally perfectly sound.
These are the problems we are asked about most:
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
What your quote should include
- The length of the guarantee and what it covers
- How changes to the job are handled
- When it can be used again
- Whether there are any call-out or travel charges
What we cannot put right
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
