Windsor and Maidenhead · England
Bath re-enamelling & resurfacing in Brookside, Windsor and Maidenhead
We travel to Brookside for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow the best part of a day. Before leaving, we tell you when it can be used and how to look after it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
Before we arrive
- Let us know if it has been repaired before
- Point us to the nearest place to park
- Have a window or extractor fan available
How to get a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Bath re-enamelling in Brookside without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. We regularly repair Victorian roll-tops, acrylic baths and basins & shower trays, and the jobs we see most are lots of chips and rust spots and a bath in a colour that no longer suits.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Brookside (SL5, SL4)
- County
- Windsor and Maidenhead
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff:
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
- Do not leave bottles, razors or sponges standing on the surface
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Landlord and trade work in Brookside
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Your questions about bath re-enamelling in Brookside
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a photo of the entire item with your SL5 postcode.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Brookside. The price depends on:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- The colour and finish to match
- How much damage there is
The price reflects the work involved, not where you live. You’ll see the full price before you book.
Quotes from your pictures
You can typically get a fixed quote without us visiting. To help us price it:
- Natural light rather than flash
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Any details about the material
To get a price, send a couple of pictures using our quote form or ring us. We’ll say immediately if a repair is the right fix.
What we are called out for in Brookside
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is typically perfectly sound.
Send us a photo if you notice any of these:
- A dull, rough surface that won’t come clean
- Wear marks under the taps
- A period or roll-top bath worth keeping
- A coloured bath you want in white
What to look for in a quote
- Whether the colour is mixed to match
- How changes to the job are handled
- Aftercare advice
- Whether cleaning and preparation are in the price
Our work in Brookside
Brookside is about 3 miles east of Wick Hill, in Windsor and Maidenhead. Customers in Brookside get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Brookside is one of 57 towns and villages in Windsor and Maidenhead we cover. Our nearest city page is London, about 26 miles away.
All of SL5 and SL4 is within our area, from the main roads to the quietest streets. Whether you live on New Road, The Avenue and Coach Road or a nearby road, we can come to you. We also travel to North Ascot (1 mile south-west), Plaistow Green (1 mile north), Woodside (1 mile north-east), Ascot (1 mile south-east) and Winkfield (1 mile north-west). Larger places within reach include Maidenhead (7 miles north), Windsor (4 miles north-east), Boyn Hill (6 miles north-west), Cookham (9 miles north), Furze Platt (8 miles north) and Dedworth (4 miles north).
Near you in Brookside
Locally, our jobs take us to homes close to Royal Hunt pub, Ascot Heath Church of England Junior School and Chapel of St Mary and St John. For rail, the closest station is Ascot station, roughly 1.3 miles south of the centre. Further afield, we also cover the area around Heatherwood Hospital (1 mile south) and The Lexicon (3 miles west). For a walk, there’s Virginia Water Lake.
Repair or replace in Brookside?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. We charge the same wherever you are, so there’s no premium for Brookside. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
- Fixed prices from your photos
- No extra charge for your area
Read our pricing or bath cost comparison.
Places near Brookside
Other services in Brookside
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What we can’t put right
A repair is not right for every job, including:
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
