Windsor and Maidenhead · England
Bath Re-enamelling for Winkfield homes
Our repair technicians come to Winkfield for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Stains that won’t shift
- An old resurfacing that is failing
What bath re-enamelling costs
Prices start from £350. We price every job individually. The main factors are:
- The type of damage
- The colour and finish to match
- The material
- How much damage there is
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- Any earlier repairs or coatings
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
Upload a picture of the damage and a wider shot of the whole item, and tell us you are in Winkfield, and we’ll come back with a fixed quote.
Bath re-enamelling in Winkfield without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We are frequently asked to fix thin, worn enamel in places and enamel that’s lost its shine and feels rough, across basins & shower trays, acrylic baths and cast iron baths.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Winkfield (SL4)
- County
- Windsor and Maidenhead
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a full day. Before we go, we will explain how long to leave it and how to care for it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
Getting ready for the visit
- Open a window if you can
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
Get a quote
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Also near Winkfield
What else we do in Winkfield
Signs you need bath re-enamelling in Winkfield
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Keep an eye out for these signs:
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
Questions to ask before booking
- What protection goes down before work starts
- What aftercare is recommended
- What happens if they find more damage
- How long it needs to cure
What we cannot put right
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Work for landlords and builders
For anyone letting property in or around Winkfield, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Have chips seen to early
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Common questions in Winkfield
Do you come to Winkfield?
Yes, we do. Technicians travel to Winkfield from across the region, with no extra charge for travel.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote with dates.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Our work in Winkfield
Winkfield is about 3 miles north-east of Bracknell, in Windsor and Maidenhead. Anywhere in SL4, we come to you. Our repair technicians cover 57 places in Windsor and Maidenhead, from the larger towns to small villages. Our nearest city page is London, about 26 miles away.
Our visits in SL4 work the same way as everywhere else we cover. Local streets include Church Road, St Marys Lane and Pigeonhouse Lane, and we cover them all. Being close to the A330, Winkfield is easy for our technicians to reach. If you are just outside Winkfield, we cover Plaistow Green (1 mile south-east), Cranbourne (1 mile east), Brookside (1 mile south-east), Woodside (2 miles south-east) and North Ascot (2 miles south). Within a short drive, we also cover Maidenhead (6 miles north), Windsor (4 miles north-east), Boyn Hill (5 miles north), Cookham (8 miles north), Furze Platt (7 miles north) and Dedworth (3 miles north-east).
What’s near Winkfield
In Winkfield, that means homes near Winkfield St Mary's CofE Primary School, Lambrook and Church of St Mary, among other places. The nearest railway station is Ascot station, about 2.7 miles south of the centre. Other landmarks nearby include Windsor Castle (4.9 miles north-east) and The Lexicon (2.9 miles south-west). Not far away are Bray Pit and Virginia Water Lake.
About our accreditations · Every repair comes with a one-year guarantee.
