Cumbria · England
Bath Re-enamelling for Broughton Moor homes
We travel to Broughton Moor for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
Covering Broughton Moor
Broughton Moor is about 5 miles north-east of Workington, in Cumbria. We visit clients in Broughton Moor and the surrounding area, so there’s no workshop to go to. Broughton Moor is one of 438 places in Cumbria where we work. Our jobs stretch from Broughton Moor to Newcastle upon Tyne (76 miles away).
Our technicians cover all of CA15. That includes homes on Church Road, The Avenue and School Close. Nearby, we also work in Little Broughton (2 miles south-east), Great Broughton (2 miles south-east), Broughton Cross (2 miles south-east), Dovenby (3 miles east) and Great Clifton (3 miles south). Within a short drive, we also cover Workington (5 miles south-west), Whitehaven (11 miles south-west), Cockermouth (5 miles south-east), Keswick (15 miles south-east), Moorclose (5 miles south-west) and Wigton (15 miles north-east).
Near you in Broughton Moor
Typical jobs here are in homes near Netherhall School, Church of St Columba and Broughton Moor Primary School and the streets around them. The closest station to Broughton Moor is Maryport station, about 1.9 miles north-west of the centre. Further afield, we also cover the area around Ellenborough and Ewanrigg (1.4 miles north-west) and Senhouse Roman Museum (2.4 miles north-west). For a walk, there is Siddick Pond.
About our bath re-enamelling in Broughton Moor
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair cast iron baths, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are stains that won’t shift and a bath in a colour that no longer suits.
All of our repairs are guaranteed for twelve months in Broughton Moor and everywhere else. If something goes wrong with the work, we come back.
- Where
- Broughton Moor (CA15)
- Area hub
- Cumbria
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff:
- Do not let dyes or oils sit on the finish
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What affects the price in Broughton Moor
Resurfacing from £350. You’ll know the full cost before booking. We look at:
- How hard the colour is to match
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- How much damage there is
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Good photos mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- A photo taken from further back
- A clear, close picture of the problem area
If you’re in Broughton Moor and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Landlords, agents and businesses in Broughton Moor
Landlords, letting agents and housing providers in Broughton Moor use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Broughton Moor questions
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens after I send photos?
We come back with a fixed price, generally with dates to choose from. There’s no obligation to book.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Broughton Moor. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- Straight answers about what a repair can do
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
Read our prices page or guide to resurfacing and replacement costs.
Nearby places to Broughton Moor
What else we do in Broughton Moor
How it works
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow the best part of a day, and we’ll tell you if anything changes.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
