Vale of Glamorgan · Wales
Bath re-enamelling & resurfacing in Broughton, Vale of Glamorgan
We travel to Broughton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- Stains that won’t shift
About our bath re-enamelling in Broughton
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. If you’re dealing with stains that won’t shift and enamel that’s lost its shine and feels rough, we can generally put it right.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Location
- Broughton (CF71)
- County
- Vale of Glamorgan
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Repairing versus replacing in Broughton
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- Straight answers about what a repair can do
- Colour-matched on site
Take a look at our prices page and bath cost comparison.
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Broughton. The price depends on:
- Whether old repairs or coatings need taking off
- The material
- The type of damage
- The colour and finish to match
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- The material, if you know it
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Where we work around Broughton
Broughton is about 6 miles south of Bridgend, in the Vale of Glamorgan. Our repair technicians come to homes and businesses in Broughton and the surrounding area, so there’s no workshop to go to. Broughton is one of 67 towns and villages in the Vale of Glamorgan where we work.
Our repair technicians cover all of the CF71 postcode area and the streets around it. That includes homes on West Street and Chapel Road. If you are just outside Broughton, we cover Tre-pit (1 mile north-west), Wick (1 mile north), Marcroes (1 mile south), Clemenstone (2 miles north) and Llandw (2 miles north-east). Further out, we also cover Barry (12 miles east), Gibbonsdown (12 miles east), Cadoxton (13 miles east), Dinas Powys (15 miles east), Llantwit Major (3 miles south-east) and Cowbridge (5 miles north-east).
What’s near Broughton
Typical jobs here are in homes near Wick Marcross C.I.W. Primary School, The Plough and Harrow pub and St Mary's Church, among other places. The nearest railway station is Llantwit Major station, roughly 3.4 miles south-east of the centre. A little further out are Llandow Castle (1.7 miles north-east) and Llandow/Ewenny (2.9 miles north-east). Not far away are Wick Hill.
Nearby places to Broughton
More services for Broughton
When we’d advise against a repair
In fairness, there are a few things a repair will not fix:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- A bath split right through the body
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
What happens on the day
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
How to get a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say straight away whether it can be repaired.
Advice
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in the Vale of Glamorgan and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Aftercare tips
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- Get any chip repaired quickly
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Questions from Broughton
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
How long will the bath be out of use?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Broughton.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
About our accreditations · Every repair comes with a one-year guarantee.
