Lancashire · England
Bath Re-enamelling for Bruna Hill homes
Full bath re-enamelling and resurfacing at your home in Bruna Hill, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- A dull, rough surface that will not come clean
What a repair cannot fix
A repair isn’t right for every job, for example:
- Leaking taps or wastes (a plumber’s job)
- Problems we can’t see until an old finish comes off
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Bath re-enamelling in Bruna Hill without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We work on acrylic baths, cast iron baths and Victorian roll-tops, and common reasons people contact us are chips and rust in more than one place and a roll-top that’s seen better days.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Bruna Hill (PR3)
- County
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Other services in Bruna Hill
About Bruna Hill
Bruna Hill is about 8 miles north of Fulwood, in Lancashire. Whether you are in the middle of Bruna Hill or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Bruna Hill is one of 482 places in Lancashire we cover. Our jobs stretch from Bruna Hill to Liverpool (34 miles away).
We cover every part of the PR3 postcode area. Other places close to Bruna Hill include Bowgreave (1 mile south-west), Bonds (1 mile north-west), Catterall (1 mile south), Stubbins (1 mile south-east) and Nook (1 mile south-west). Within a short drive, we also cover Preston (9 miles south), Lancaster (11 miles north), Lytham St Anne's (14 miles south-west), Bamber Bridge (12 miles south), Morecambe (13 miles north) and Leyland (14 miles south).
Local landmarks in Bruna Hill
Typical jobs here are in homes near The Church Inn, Garstang Community Academy and Church of St Mary and St Michael and the streets around them. Nearby you will also find Greenhalgh Castle (0.6 miles north). The countryside around Bruna Hill includes Winmarleigh and Cockerham Moss and Nicky Nook.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
How the visit works
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow most of the day from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
Ask for a price
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Questions from Bruna Hill
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Do you cover the entire of Lancashire?
The whole UK, including all of Lancashire. Just include your postcode and we’ll confirm dates.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you quote from pictures?
Nearly always. If photos do not show enough, we will ask for another angle.
Repair or replace in Bruna Hill?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why book with us
- Technicians who travel to you, UK-wide
- One price list for the entire UK
- Dust sheets down, tidy finish
- A fixed quote before you book
Read our pricing or bath cost comparison.
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- How many areas need work
- Where the damage is and how we get to it
- Whether we combine several jobs
- The type of damage
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Where you are, by postcode
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
How to care for the repair
How the surface is treated afterwards matters:
- Store bottles off the bath
- Do not use the bath until it has fully cured
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
When to call us in Bruna Hill
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
The most common problems we are called about are:
- A coloured bath you want in white
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
Questions to ask before booking
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
