Lancashire · England

Bath re-enamelling & resurfacing in Catterall, Lancashire

Bath re-enamelling in and around Catterall: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Catterall?

How we handle bath re-enamelling in Catterall

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for an outdated colour you’d like to change and staining under the taps and around the waste, on Victorian roll-tops, pressed steel baths and basins & shower trays.

A one-year guarantee comes as standard.

Location
Catterall (PR3)
County
Lancashire
Warranty
One year on every repair
Price
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Where we work around Catterall

Catterall is about 7 miles north of Fulwood, in Lancashire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Catterall is one of 482 towns and villages in Lancashire we cover. You can also see our page for Liverpool, about 33 miles away.

Our visits in PR3 are booked in the same way as anywhere else. From Baylton Drive, Boyes Avenue and Milford Close or a nearby road, a technician can come to you. Close by, we cover Stubbins (1 mile east), Bowgreave (1 mile north), Nook (1 mile north-west), Bruna Hill (1 mile north) and Churchtown (1 mile west). Within a short drive, we also cover Preston (8 miles south), Lancaster (12 miles north), Lytham St Anne's (13 miles south-west), Bamber Bridge (11 miles south), Morecambe (14 miles north) and Leyland (13 miles south).

Around Catterall

We visit homes around Garstang Community Academy, Brockholes Arms and St Helen's Church, among other places. Other landmarks nearby include Greenhalgh Castle (1.5 miles north). The countryside around Catterall includes Nicky Nook and Winmarleigh and Cockerham Moss.

Map of Catterall © OpenStreetMap contributors

What a repair cannot fix

A repair isn’t always the answer, and we will tell you before we start. We can’t fix:

  • A metal bath with a through crack
  • A poorly supported acrylic bath, until it’s firmed up
  • Steel that has corroded right through

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths

For landlords and businesses

We are used to working with agents and managing companies. Send the address, photos and access details.

Landlords, letting agents and housing providers in Catterall use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

How the visit works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Open a window if you can
  • Tell us about any previous repairs or coatings
  • Let us know about parking or access

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Send pictures for a quote

Read more

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

What we are called out for in Catterall

Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

These are the problems we’re asked about most:

  • A period or roll-top bath worth keeping
  • A coating lifting around the plughole
  • An outdated colour you’d like to change
  • Lots of chips and rust spots

What to look for in a quote

  • What happens if they find more damage
  • Whether the price is fixed and includes VAT
  • Whether cleaning and preparation are in the price
  • How soon you can use it again

Our hiring checklist

Materials and what they mean for the repair

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.

Repairing versus replacing in Catterall

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You’ll see the full price before booking.

Why choose Surface Doctor in Catterall

  • Most jobs done in one visit
  • One-year guarantee on every repair
  • We’ll tell you if it’s not worth repairing
  • Everything repaired in place

See our pricing or guide to resurfacing and replacement costs.

Catterall: your questions answered

Will the bath be moved?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Can you change the colour of my bath?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

What if the damage is worse than the photos show?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

How do I book?

Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

What bath re-enamelling costs

Resurfacing from £350. Every quote is fixed and free. What we take into account:

  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it
  • Unusual colours or finishes
  • What the surface is made of

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Send photos for a quote

Two or three clear pictures are usually enough. Try to include:

  • Good light, ideally daylight, without flash glare
  • A coin or ruler next to the damage for scale
  • Any details about the material
  • One sharp close-up of the damage

Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Catterall, and we’ll reply with a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.