Hampshire · England
Bath re-enamelling & resurfacing in Bull Hill, Hampshire
Full bath re-enamelling and resurfacing for homes and businesses in Bull Hill and across Hampshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Bull Hill
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s a period or roll-top bath worth keeping and wear marks under the taps, we can usually put it right, on cast iron baths, acrylic baths and Victorian roll-tops alike.
A one-year guarantee comes as standard.
- Area
- Bull Hill (SO41)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Read more
Honest limits
A repair isn’t always the answer, and we’ll tell you before we start. We cannot fix:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs immediately
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
Dry the bath after use if possible, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Common questions in Bull Hill
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
What happens after I send photos?
We come back with a fixed quote. There is no obligation to book.
Repairing versus replacing in Bull Hill
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- We will tell you if it’s not worth repairing
See our prices page and guide to resurfacing and replacement costs.
Also near Bull Hill
What else we do in Bull Hill
For landlords and businesses
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Bull Hill use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Where we work around Bull Hill
Bull Hill is about 2 miles north-east of Lymington, in Hampshire. Clients in Bull Hill get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages. We work right across the region, from Bull Hill to London (79 miles away).
Our visits in SO41 work the same way as everywhere else we cover. Jobs here include addresses on Holly Lane and Jordans Lane. If you are just outside Bull Hill, we cover Pilley Bailey (1 mile north-west), Pilley (1 mile west), Portmore (1 mile south), Warborne (1 mile south-west) and Boldre (1 mile west). Larger places within reach include Eastleigh (15 miles north-east), Fareham (15 miles east), Totton (9 miles north), Chandler's Ford (15 miles north-east), Hedge End (13 miles north-east) and Romsey (15 miles north).
What’s near Bull Hill
In Bull Hill, that means homes near Saint Nicholas Chapel, William Gilpin Church of England Primary School and Southlands School, among other places. The nearest railway station is Lymington Town station, about 1.8 miles south-west of the centre. Further afield, we also cover the area around Lymington New Forest Hospital (1.5 miles south-west) and St Barbe Museum and Art Gallery (2 miles south-west). Open spaces near Bull Hill include Boldre Foreshore.
Do you need bath re-enamelling in Bull Hill?
Frequently the bath has just had decades of use, and only the surface is worn. The body of the bath is typically perfectly sound.
Signs it’s time to call us include:
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
Before you book anyone
- What aftercare is recommended
- Whether there are any call-out or travel charges
- How your room will be protected
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
