Warwickshire · England
Bath re-enamelling & resurfacing in Burmington, Warwickshire
We travel to Burmington for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- Lots of chips and rust spots
Bath re-enamelling in Burmington without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We’re often asked to fix staining under the taps and around the waste and chips and rust in more than one place, in pressed steel baths, Victorian roll-tops and basins & shower trays.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Burmington (CV36)
- Region
- Warwickshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Burmington
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How long will the bath be out of use?
Usually one day, with the bath ready the following day. A badly pitted bath can need a second day.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we will plan for it.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item with your CV36 postcode.
When we’d advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Keeping it looking good
To keep it looking its best:
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
- Never use suction bath mats
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Towns and villages near Burmington
Other services in Burmington
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Burmington. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Free fixed quotes from pictures
- We will tell you if it’s not worth repairing
- Usually one visit, start to finish
- We come to you, anywhere in the UK
Take a look at our prices page and guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £350. There is no area surcharge for Burmington. What changes the price is:
- What kind of damage it is
- Doing more than one item at once
- How many areas need work
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- Where you are, by postcode
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
What we do, step by step
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. You can expect it to take the best part of a day, and we will tell you if anything changes.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Open a window if you can
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
Getting a price
If you’re in Burmington and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Landlords, agents and businesses in Burmington
Housing associations and facilities teams use us for planned and reactive repairs in Warwickshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
About Burmington
Burmington is about 11 miles south of Stratford-upon-Avon, in Warwickshire. Our repair technicians come to clients in Burmington and nearby villages, so there is no workshop to go to. Burmington is one of 324 towns and villages in Warwickshire where we work. Our nearest city page is Birmingham, about 32 miles away.
Our visits in CV36 work the same way as everywhere else we cover. That includes homes on Main Street and The Lane and the roads around them. Neighbouring places we cover include Tidmington (1 mile north-west), Willington (1 mile north), Little Wolford (2 miles south), Shipston-on-Stour (2 miles north) and Todenham (2 miles south-west). Larger places within reach include Stratford-upon-Avon (11 miles north), Wellesbourne (10 miles north), Middle Quinton (8 miles north-west), Bidford-on-Avon (14 miles north-west), Meon Vale (8 miles north-west) and Lighthorne Heath (12 miles north-east).
Landmarks near Burmington
Locally, our jobs take us to homes close to Church of St Barnabas and St Nicholas and Shipston High School, among other places. The closest station to Burmington is Moreton-In-Marsh station, roughly 4.9 miles south-west. Further afield, we also cover the area around Wheelbarrow Castle (4.3 miles south) and Ellen Badger Hospital (1.9 miles north). Not far away are Castle Hill.
About our accreditations · Every repair comes with a one-year guarantee.
