Warwickshire · England
Bath Re-enamelling in Wellesbourne
Our repair technicians come to Wellesbourne for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Wellesbourne
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We’re often asked to fix a coating lifting around the plughole and a coloured bath you want in white, on cast iron baths, acrylic baths and pressed steel baths.
Every repair comes with our one-year guarantee.
- Area
- Wellesbourne (CV35)
- County
- Warwickshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Should you replace it?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Generally one visit, start to finish
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
Take a look at our pricing or guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Wellesbourne
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Do not use the bath until it has fully cured
- Repair dripping taps early
- Avoid suction-cup mats
- Have chips seen to early
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Where we work around Wellesbourne
Wellesbourne is about 5 miles east of Stratford-upon-Avon, in Warwickshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in all 324 towns and villages across Warwickshire. We work right across the region, from Wellesbourne to Birmingham (23 miles away).
Our technicians cover all of the CV35 postcode area and the streets around it. We regularly work on streets such as Chestnut Square, Grantham Road and Chedham Road. We also travel to Walton (1 mile south-east), Compton Verney (2 miles south-east), Combrook (3 miles south-east), Butlers Marston (4 miles south-east) and Lighthorne (4 miles east). Further out, we also cover Warwick (6 miles north), Royal Leamington Spa (8 miles north), Stratford-upon-Avon (5 miles west), Leamington Spa (8 miles north), Kenilworth (11 miles north) and Southam (10 miles north-east).
Local landmarks in Wellesbourne
Our customers here include homes close to Church of St Peter, Kings Head Public House and Wellesbourne CofE Primary School. Nearby you’ll also find Chedham's Yard (within half a mile north-east) and Duke of Bedford's Castle (3.9 miles north-west).
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- The colour and finish to match
- Whether we combine several jobs
- The type of damage
- The size and number of damaged areas
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Send pictures for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- Something in shot to show the size
- Natural light rather than flash
- One picture of the entire bath
If you’re in Wellesbourne and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Do you need bath re-enamelling in Wellesbourne?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Signs it’s time to call us include:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Before booking anyone
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- What the guarantee covers, and for how long
Places near Wellesbourne
Also in Wellesbourne
About our accreditations · Every repair comes with a one-year guarantee.
