Gloucestershire · England

Bath Re-enamelling in Stretton-on-Fosse

Damaged bath in Stretton-on-Fosse? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Stretton-on-Fosse?

Stretton-on-Fosse: your questions answered

Is there any odour?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Gloucestershire.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

What do you need from me?

Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

Someone resurfaced my bath and it’s peeling. Can you help?

Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.

About our bath re-enamelling in Stretton-on-Fosse

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s an original cast iron bath that needs restoring and a coating lifting around the plughole, we can generally put it right.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.

Area
Stretton-on-Fosse (GL56)
Area hub
Gloucestershire
Cover
A year, on every repair
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Keep toiletries on a shelf rather than in the bath
  • Do not leave a chip unrepaired
  • Clean with a soft cloth and mild detergent
  • Avoid suction-cup mats

A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.

When to call us in Stretton-on-Fosse

Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.

Keep an eye out for any of the following:

  • Chips and rust in more than one place
  • A bath that stays dull however much you clean it
  • Thin, worn enamel in places
  • Stains that will not shift

Questions to ask before you book

  • Whether cleaning and preparation are in the price
  • Who will actually do the work
  • What happens if the damage is worse than the pictures show
  • Is the price fixed, and does it include VAT?

10 questions to ask before booking

Landlord and trade work in Stretton-on-Fosse

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.

What happens on the day

We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. Allow a full day, and we’ll keep you posted as we go.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the next day.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Move bottles, mats and clutter away from the area
  • Tell us about any previous repairs or coatings

Ask for a price

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.

Get a fixed quote

Related advice

Why repair rather than replace?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Why choose Surface Doctor in Stretton-on-Fosse

  • No extra charge for your area
  • Accredited with CHAS, Constructionline and SafeContractor
  • Every repair guaranteed for a year
  • Straight answers about what a repair can do

See our full price list or guide to resurfacing and replacement costs.

Materials and what they mean for the repair

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.

Our work in Stretton-on-Fosse

Stretton-on-Fosse is about 11 miles south of Stratford-upon-Avon, in Gloucestershire. Whether you are in the middle of Stretton-on-Fosse or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Stretton-on-Fosse is one of 470 places in Gloucestershire where we work. You can also see our page for Birmingham, about 31 miles away.

Here we cover the GL56 postcode area. Neighbouring places we cover include Todenham (2 miles south-east), Tidmington (2 miles east), Shipston-on-Stour (3 miles north-east), Burmington (3 miles east) and Willington (3 miles east). Larger places within reach include Moreton-in-Marsh (4 miles south), Winchcombe (14 miles south-west), Bourton-on-the-Water (11 miles south), Chipping Campden (4 miles west), Stow-on-the-Wold (8 miles south) and Upper Rissington (12 miles south).

What’s near Stretton-on-Fosse

Locally, our jobs take us to homes close to Church of St Peter and Shipston High School, among other places. For rail, the closest station is Moreton-In-Marsh station, roughly 3.7 miles south of the centre. Other landmarks nearby include Ellen Badger Hospital (2.9 miles north-east) and Aston Magna Bygones Museum (2.3 miles south-west).

Map of Stretton-on-Fosse © OpenStreetMap contributors

How we price bath re-enamelling

Resurfacing from £350. Prices are worked out job by job. What matters most is:

  • The size and number of damaged areas
  • The type of damage
  • The material and finish
  • Access to the area

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Getting a price from pictures

Photographing the damage takes a minute. Please include:

  • Daylight if possible, and no flash reflection
  • Any earlier repairs or coatings
  • Where you are, by postcode
  • One picture of the entire bath

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.