Cornwall · England
Bath Re-enamelling in Burncoose
Bath re-enamelling for Burncoose, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Enamel that is lost its shine and feels rough
Keeping it looking good
Aftercare is simple:
- Get any chip repaired quickly
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About our bath re-enamelling in Burncoose
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our repair technicians work on pressed steel baths, basins & shower trays and cast iron baths, and the jobs we see most are a bath in a colour that no longer suits and a period or roll-top bath worth keeping.
Big or small, you get the same one-year guarantee in Burncoose and across Cornwall.
- Location
- Burncoose (TR16, TR3)
- Area hub
- Cornwall
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
We turn up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Keep children and pets away from the room on the day
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Related advice
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why us?
- We leave the room as we found it
- Colour-matched on site
- Straight answers about what a repair can do
- No extra charge for your area
Read our pricing or bath cost comparison.
Burncoose: your questions answered
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair something that’s been repaired before?
Generally, yes. We remove the old repair before doing a new one.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item with your TR16 postcode.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
What else we do in Burncoose
Honest limits
Before you book, it’s worth knowing the limits:
- A bath that is rusted through
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly.
Materials we work on in Burncoose
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- Where the damage is and how we get to it
- The colour and finish to match
- What kind of damage it is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Two or three clear photos are usually enough. It helps if you send:
- Something in shot to show the size
- A close-up of the damage, in focus
- One picture of the whole bath
- What it’s made of, if you know
If you’re in Burncoose and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
About Burncoose
Burncoose is about 3 miles south-east of Redruth, in Cornwall. Across the TR16 area, we carry out the work at your property. Burncoose is one of 644 towns and villages in Cornwall where we work.
Postcode districts we cover here: TR16 and TR3. Being close to the A393, Burncoose is simple for us to get to. Other places close to Burncoose include Gwennap (1 mile north-west), Tresamble (1 mile east), Frogpool (1 mile east), Sparry Bottom (1 mile north) and Tresavean (1 mile west). Larger places within reach include Truro (6 miles north-east), Newquay (15 miles north), Falmouth (6 miles south-east), Camborne (6 miles west), Redruth (3 miles north-west) and Helston (9 miles south-west).
Landmarks near Burncoose
In Burncoose, that means homes near Church of Saint Wenappa and the streets around them. Burncoose’s nearest station is Perranwell station, roughly 2.4 miles east. Further afield, we also cover the area around Camborne Redruth Community Hospital (3.7 miles west) and Museum of Cornish Methodism (1.5 miles north). Green spaces nearby include Carnmenellis.
Signs you need bath re-enamelling in Burncoose
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
You may need us if you’ve spotted any of these:
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
- A coloured bath you want in white
Questions to ask before you book
- What the guarantee covers, and for how long
- What prep work is covered
- What happens if the damage is worse than the pictures show
- Whether there are any call-out or travel charges
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
