Bolton · England
Bath re-enamelling & resurfacing in Burnden, Bolton
Full bath re-enamelling and resurfacing in Burnden, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Staining under the taps and around the waste
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Bath re-enamelling in Burnden, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We are often asked to fix a period or roll-top bath worth keeping and worn patches where water runs and sits, in cast iron baths, basins & shower trays and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Burnden (BL3, BL2, BL4)
- County
- Bolton
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Burnden?
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The most common problems we are called about are:
- Several chips and rust patches
- A coating lifting around the plughole
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
Comparing quotes
- Whether cleaning and preparation are in the price
- Who turns up on the day
- How your room will be protected
- Is the price fixed, and does it include VAT?
Repairing versus replacing in Burnden
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Fixed prices from your photos
- We’ll tell you if it’s not worth repairing
See our pricing or resurfacing vs replacement cost guide.
Questions from Burnden
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
How long will the bath be out of use?
One day for most baths, ready the next day. We give you timings with the quote.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do you work in Burnden?
Yes. We cover the whole UK and travel to Burnden. Send us pictures for a fixed quote, or call 0345 017 0787.
Landlords, agents and businesses in Burnden
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Do not leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Places near Burnden
Also in Burnden
How it works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the next day.
Before we arrive
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Read more
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- How many items we do on one visit
- The material and finish
- The colour and finish to match
- How many areas need work
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
Email us photos of the damage and one of the entire item, and tell us you are in Burnden, and we’ll reply with a fixed quote.
Covering Burnden
Burnden is about 2 miles south-east of Bolton, in Bolton. Jobs in Burnden are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Burnden is one of 61 towns and villages in Bolton where we work. Our jobs stretch from Burnden to Manchester (about 10 miles away).
We cover every part of the BL3, BL2 and BL4 postcode area and the streets around it. We regularly work on streets such as Green Lane, Croft Lane and Raikes Lane and the roads around them. We also cover the places around Burnden: Darcy Lever (1 mile north-east), Great Lever (1 mile west), Harper Green (1 mile south), Moses Gate (1 mile south-east) and Farnworth (1 mile south). Within a short drive, we also cover Horwich (6 miles west), Westhoughton (5 miles west), Woolfold (5 miles north-east), Astley Bridge (3 miles north), Sharples (3 miles north) and Daisy Hill (5 miles south-west).
Local landmarks in Burnden
Our customers here include homes close to Leverhulme Park, Churchills Public House and Mount St Joseph and the streets around them. Also close by are Bolton Library and Museum Services (1.3 miles north-west), St Michael's CofE Primary School (under half a mile south-east) and Church of St Michael With St Bartholomew (within half a mile south-east). For rail, the closest station is Moses Gate station, roughly 0.7 miles south-east. Other landmarks nearby include Bolton Market Place (1.3 miles north-west) and Bolton le Moors (1.3 miles north-west). Not far away are Nob End.
When a repair is not the answer
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
Send us pictures and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
