Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Burrington, Bath and North East Somerset
Bath re-enamelling in Burrington without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
About our bath re-enamelling in Burrington
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our technicians work on basins & shower trays, Victorian roll-tops and cast iron baths, and people most frequently call us about enamel that’s lost its shine and feels rough and several chips and rust patches.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Location
- Burrington (BS40)
- Region
- Bath and North East Somerset
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Burrington
Burrington is about 7 miles south of Nailsea, in Bath and North East Somerset. Jobs in Burrington are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover all 136 towns and villages in Bath and North East Somerset.
Our repair technicians cover all of the BS40 postcode area and the streets around it. Neighbouring places we cover include Rickford (1 mile east), Link (1 mile south-west), Upper Langford (1 mile west), Havyatt Green (1 mile north) and Lower Langford (1 mile north-west). Within a short drive, we also cover Keynsham (12 miles north-east), Twerton (15 miles east), Paulton (11 miles east), Peasedown St John (14 miles east), Saltford (13 miles east) and Whiteway (15 miles east).
What’s near Burrington
We visit homes around Church of Holy Trinity and Burrington Church of England Voluntary Aided Primary School, among other places. Nearby you’ll also find Banwell Castle (4.7 miles west) and Goughs Motor Museum (3.7 miles south). Not far away are Kingswood and Black Down.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- The size and number of damaged areas
- Whether we combine several jobs
- The material
- What kind of damage it is
Our prices are the same across the UK, with no extra for Burrington. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your photos
You can usually get a fixed quote without us visiting. To help us price it:
- A photo taken from further back
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Your questions about bath re-enamelling in Burrington
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is there any odour?
Expect a mild smell while we’re working.
What happens next?
We come back with a fixed quote, generally with dates to choose from. You are under no obligation.
Are there extra charges for Burrington?
We do not add a call-out fee. The fixed price covers the visit and the work.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Towns and villages near Burrington
Also in Burrington
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
For landlords and businesses
If you manage property in Burrington, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What a repair can’t fix
A repair is not right for every job, including:
- A cast iron or steel bath that is cracked right through
- A bath that’s rusted through
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Signs you need bath re-enamelling in Burrington
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we are called about are:
- Several chips and rust patches
- A roll-top that is seen better days
- Wear marks under the taps
- A coloured bath you want in white
What to look for in a quote
- Whether cleaning and preparation are in the price
- When it can be used again
- If travel is included in the price
- How your room will be protected
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Ensure the room can be ventilated
Get a quote
If you’re in Burrington and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Straight answers about what a repair can do
- Typically one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
Take a look at our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
