Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Aldwick, Bath and North East Somerset
Problem with your bath in Aldwick? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste
Bath re-enamelling in Aldwick, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring, in acrylic baths, Victorian roll-tops and cast iron baths.
Big or small, it’s backed by a one-year guarantee.
- Area
- Aldwick (BS40)
- Area hub
- Bath and North East Somerset
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Aldwick and nearby
Aldwick is about 6 miles south of Nailsea, in Bath and North East Somerset. Jobs in Aldwick are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Aldwick is one of 136 towns and villages in Bath and North East Somerset we cover.
Postcode districts we cover here: BS40. We also travel to Lye Cross (1 mile north), Lye Hole (1 mile north-east), Havyatt Green (1 mile west), Rickford (1 mile south-west) and Burrington (1 mile south-west). Within a short drive, we also cover Keynsham (11 miles north-east), Westmoreland (15 miles east), Kingsmead (15 miles east), Lower Weston (15 miles east), Locksbrook (15 miles east) and Twerton (14 miles east).
What’s near Aldwick
Other landmarks nearby include Barrow Hospital (5.7 miles north-east). The countryside around Aldwick includes Black Down.
Prices and what affects them
Resurfacing from £350. There is no charge for travel to Aldwick. The price depends on:
- Unusual colours or finishes
- What the surface is made of
- Where the damage is and how we get to it
- Whether we combine several jobs
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- A picture taken from further back
- Details of any past repairs
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- We come to you, anywhere in the UK
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
- One-year guarantee on every repair
See our pricing or resurfacing vs replacement cost guide.
How to care for the repair
Simple care helps the repair last. Our advice:
- Fix dripping taps quickly
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs straight away
- Wipe the bath dry after use in hard water areas
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Aldwick: your questions answered
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How much does bath re-enamelling cost in Aldwick?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your BS40 postcode.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Leaks from fittings rather than the bath
- A bath that is rusted through
- A bath split right through the body
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Landlords, agents and businesses in Aldwick
We work for landlords, letting agents and housing providers in Aldwick as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a full day. We clean up when we’re done and let you know when you can use it again.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the next day.
How to prepare
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Read more
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Places near Aldwick
Also in Aldwick
About our accreditations · Every repair comes with a one-year guarantee.
