Buckinghamshire · England
Bath re-enamelling & resurfacing in Burroughs Grove, Buckinghamshire
Full bath re-enamelling and resurfacing at your home in Burroughs Grove, with a one-year guarantee on every repair.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A roll-top that is seen better days
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our bath re-enamelling in Burroughs Grove
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. If you are dealing with staining under the taps and around the waste and an old resurfacing that’s failing, we can generally put it right, whatever the material.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Burroughs Grove (SL7)
- County
- Buckinghamshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Also near Burroughs Grove
Also in Burroughs Grove
Burroughs Grove questions
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Will the price change on the day?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Burroughs Grove.
How much does bath re-enamelling cost in Burroughs Grove?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you fix a peeling bath coating?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
When we would advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- A bath split right through the body
- Steel that has corroded right through
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- One price list for the entire UK
Read our full price list or bath cost comparison.
How it works
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes a full day. The room is left tidy and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Related advice
About Burroughs Grove
Burroughs Grove is about 1 mile north of Marlow, in Buckinghamshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Burroughs Grove is one of 263 places in Buckinghamshire where we work. You can also see our page for London, about 29 miles away.
Postcode districts we cover here: SL7. You will find streets such as Pump Lane North and Wycombe Road, all of which we cover. Close by, we cover Marlow Bottom (1 mile west), Little Marlow (1 mile south-east), Marlow (1 mile south), Fern (2 miles east) and Coldmoorholme (2 miles south-east). Further out, we also cover High Wycombe (3 miles north), Chesham (10 miles north-east), Amersham (9 miles north-east), Beaconsfield (5 miles east), Chalfont St Peter (9 miles east) and Southcourt (15 miles north).
Landmarks near Burroughs Grove
Locally, our jobs take us to homes close to Burford School, Three Horseshoes pub and St Mary the Virgin, among other places. Burroughs Grove’s nearest station is Marlow station, roughly 1.5 miles south of the centre. Other landmarks nearby include Marlow Community Hospital (1.4 miles south) and Eden (2.6 miles north). Green spaces nearby include Warren Nature Reserve.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
- Don’t leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs straight away
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What we’re called out for in Burroughs Grove
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
The things clients typically mention when they call include:
- Lots of chips and rust spots
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Before booking anyone
- Who turns up on the day
- How changes to the job are handled
- What protection goes down before work starts
- The length of the guarantee and what it covers
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
