Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Burwardsley, Cheshire West and Chester
Bath re-enamelling in and around Burwardsley: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
Landlords, agents and businesses in Burwardsley
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
How we handle bath re-enamelling in Burwardsley
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s a peeling or bubbling previous coating and wear marks under the taps, we can help.
You get a one-year guarantee, the same in Burwardsley as everywhere else we work.
- Area
- Burwardsley (CH3)
- Region
- Cheshire West and Chester
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Burwardsley. The price reflects:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- How hard the colour is to match
- Doing more than one item at once
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Before you send pictures, a few simple things make all the difference:
- Where you are, by postcode
- The material, if you know it
- Natural light rather than flash
- Any earlier repairs or coatings
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
When to call us in Burwardsley
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Signs it’s time to call us include:
- Several chips and rust patches
- A roll-top that’s seen better days
- A coating lifting around the plughole
- Thin, worn enamel in places
What to look for in a quote
- Who will actually do the work
- What happens if the damage is worse than the photos show
- Is the price fixed, and does it include VAT?
- If travel is included in the price
Why repair rather than replace?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- We’ll tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- Same prices wherever you are
- No need to remove anything
See our pricing and guide to resurfacing and replacement costs.
The process
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow the best part of a day from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
Ask for a price
For a price in Burwardsley, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Common questions in Burwardsley
Do you work in Burwardsley?
Yes. We work across the UK and come to Burwardsley. Send us pictures for a fixed quote, or call 0345 017 0787.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you cover the entire of Cheshire West and Chester?
Across the UK. Prices do not change with location.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Also near Burwardsley
More services for Burwardsley
Covering Burwardsley
Burwardsley is about 9 miles west of Nantwich, in Cheshire West and Chester. We visit homes and businesses in Burwardsley, so there’s no workshop to go to. We cover 224 places in Cheshire West and Chester, from the larger towns to small villages. You can also see our page for Liverpool, about 23 miles away.
We work across CH3 and the streets around it. From Church Road, Harthill Road and School Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Higher Burwardsley (1 mile east), Newtown (1 mile north-west), Newton (2 miles north), Tattenhall (2 miles north-west) and Newton-by-Tattenhall (2 miles north-west). We also work in nearby towns such as Chester (9 miles north-west), Ellesmere Port (14 miles north-west), Winsford (10 miles north-east), Northwich (14 miles north-east), Boughton (9 miles north-west) and Frodsham (13 miles north).
Around Burwardsley
Locally, our jobs take us to homes close to St John's Church and the streets around them. Nearby you’ll also find Bolesworth Castle (1.3 miles west) and Tarporley War Memorial Hospital (4.6 miles north-east). Open spaces near Burwardsley include Bickerton Hill.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Rinse off hair dye, oils and bath bombs immediately
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
