Cheshire West and Chester · England
Bath Re-enamelling in Higher Burwardsley
Bath re-enamelling across Higher Burwardsley and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Higher Burwardsley
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on pressed steel baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are staining under the taps and around the waste and a peeling or bubbling previous coating.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Higher Burwardsley (CH3)
- County
- Cheshire West and Chester
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When we would advise against a repair
It helps to know what we cannot do too:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we will tell you honestly.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Use washing-up liquid and a soft cloth
- Keep toiletries on a shelf rather than in the bath
- Do not use the bath until it has fully cured
- Repair dripping taps early
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Higher Burwardsley and nearby
Higher Burwardsley is about 8 miles west of Nantwich, in Cheshire West and Chester. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 224 places across Cheshire West and Chester, from the larger towns to small villages. We work right across the region, from Higher Burwardsley to Liverpool (about 23 miles away).
Here we cover the CH3 postcode area. Local streets include Pennsylvania Lane and Barracks Lane, all of which we cover. Neighbouring places we cover include Burwardsley (1 mile west), Newtown (2 miles north-west), Newton (2 miles north-west), Newton-by-Tattenhall (2 miles north-west) and Tattenhall (3 miles north-west). We also work in nearby towns such as Chester (9 miles north-west), Ellesmere Port (14 miles north-west), Winsford (9 miles north-east), Northwich (13 miles north-east), Boughton (9 miles north-west) and Frodsham (13 miles north).
What’s near Higher Burwardsley
Locally, our jobs take us to homes close to St John's Church, among other places. Nearby you will also find Museum of Amusements (2.4 miles north-west) and Peckforton Castle (0.9 miles north-east). Green spaces nearby include Bickerton Hill.
The process
Arrival times are agreed in advance. On site, it takes the best part of a day in most cases. The room is left tidy and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
Getting a price
Most clients in Higher Burwardsley get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Your questions about bath re-enamelling in Higher Burwardsley
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is there any odour?
There can be some smell while we work. It fades as everything cures.
Do you cover the whole of Cheshire West and Chester?
The entire UK, including all of Cheshire West and Chester. Send your postcode with your photos and we’ll confirm dates.
Do you come to Higher Burwardsley?
Yes, we do. We send a technician to Higher Burwardsley for every job, and the price is the same as everywhere else.
How do I get a price for bath re-enamelling in Higher Burwardsley?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Nearby places to Higher Burwardsley
What else we do in Higher Burwardsley
Repair or replace: which is better?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Higher Burwardsley. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- One visit for most repairs
- One-year guarantee on every repair
- Technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
See our full price list or bath cost comparison.
Signs you need bath re-enamelling in Higher Burwardsley
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Most people get in touch when they notice something like this:
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- Several chips and rust patches
- Staining under the taps and around the waste
Before you book anyone
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
- When it can be used again
- What preparation is included
About our accreditations · Every repair comes with a one-year guarantee.
