Lincolnshire · England

Bath re-enamelling & resurfacing in Butterwick, Lincolnshire

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Butterwick. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Enamel that’s lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Butterwick

Repair or replace in Butterwick?

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • No extra charge for your area
  • Every repair guaranteed for a year
  • Usually one visit, start to finish
  • We’ll tell you if it’s not worth repairing

Read our prices page or bath cost comparison.

How we handle bath re-enamelling in Butterwick

The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the next day. We are often asked to fix a bath that stays dull however much you clean it and thin, worn enamel in places, across acrylic baths, Victorian roll-tops and basins & shower trays.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Where
Butterwick (PE22)
Area hub
Lincolnshire
Guarantee
12 months on all our work
Quote
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Prices and what affects them

Prices start from £350. You’ll know the full cost before you book. We take into account:

  • The material and finish
  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • How hard the colour is to match

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what we need:

  • Daylight if possible, and no flash reflection
  • The material, if you know it
  • Whether it’s been repaired or coated before
  • A close-up of the damage, in focus

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.

What we do, step by step

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Clear the area around the damage
  • Plan for the room to be out of bounds to pets and children

How to get a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Send photos for a quote

Read more

Can I fix it myself?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Aftercare tips

A little care keeps the finish looking good. We recommend:

  • Don’t leave a chip unrepaired
  • Dry the bath after use to stop limescale
  • Don’t leave bottles, razors or sponges standing on the surface
  • Never use suction bath mats

Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Honest limits

It helps to know what we cannot do too:

  • An acrylic bath that flexes badly underfoot
  • Anything hidden under an old coating, until we remove it
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Butterwick

  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths

For landlords and businesses

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

For anyone letting property in or around Butterwick, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

Repairs by material

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.

Your questions about bath re-enamelling in Butterwick

How long does re-enamelling take?

One day for most baths, ready the following day. We give you timings with the quote.

Do you resurface freestanding baths?

Yes, frequently. We resurface the inside, and the outside can be refinished too.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

How long does re-enamelling last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we’ll take it from there.

Covering Butterwick

Butterwick is about 4 miles east of Boston, in Lincolnshire. Jobs in Butterwick are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Butterwick is one of 732 towns and villages in Lincolnshire where we work.

Here we cover the PE22 postcode area. From Church Road, Broughton's Lane and Centenary Close or anywhere nearby, a technician can come to you. Other places close to Butterwick include Brand End (1 mile north-west), Freiston (1 mile south-west), Benington (1 mile north-east), Haltoft End (1 mile west) and Benington Sea End (1 mile east). Within a short drive, we also cover Boston (4 miles west), Holbeach (13 miles south), Pinchbeck (15 miles south-west), Witham (4 miles west), Long Sutton (14 miles south) and Staniland (4 miles west).

Local landmarks in Butterwick

Around Butterwick, we work in homes near The Butterwick Pinchbeck's Endowed CofE Primary School, Kings Head pub and Church of St Andrew and the streets around them. The nearest railway station is Boston station, about 4 miles west. Well-known places in the area include We'll Meet Again Homefront Museum (1.7 miles south) and Pilgrim Hospital (3.1 miles west). For a walk, there’s Freiston Shore RSPB reserve.

Map of Butterwick © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.