Lincolnshire · England
Bath re-enamelling & resurfacing in Freiston, Lincolnshire
Bath re-enamelling for Freiston, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- Thin, worn enamel in places
About Freiston
Freiston is about 3 miles east of Boston, in Lincolnshire. From the centre of Freiston to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Freiston is one of 732 towns and villages in Lincolnshire we cover.
All of PE22 is covered, from the main roads to the quietest streets. From Church Road, Butterwick Road and Bull Pasture or a nearby road, we can come to you. We also travel to Brand End (1 mile north), Butterwick (1 mile north-east), Haltoft End (1 mile north-west), Tamworth Green (1 mile south-east) and Fishtoft (1 mile south-west). Larger places within reach include Boston (3 miles west), Holbeach (12 miles south), Pinchbeck (14 miles south-west), Witham (4 miles west), Long Sutton (13 miles south) and Staniland (4 miles west).
Around Freiston
Around Freiston, we work in homes near The Butterwick Pinchbeck's Endowed CofE Primary School, Bull & Dog pub and Church of St James. The closest station to Freiston is Boston station, about 3.3 miles west. Further afield, we also cover the area around We'll Meet Again Homefront Museum (1.6 miles south-east) and Pilgrim Hospital (2.7 miles north-west). Open spaces near Freiston include Freiston Shore RSPB reserve.
Bath re-enamelling in Freiston without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include an outdated colour you’d like to change and stains that won’t shift, on pressed steel baths, Victorian roll-tops and acrylic baths.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Freiston (PE22)
- Region
- Lincolnshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Freiston
More services for Freiston
What a repair cannot fix
Some jobs are not right for a repair, including:
- Leaks from fittings rather than the bath
- A bath that’s rusted through
- A cast iron or steel bath that’s cracked right through
Send us photos and we will tell you honestly before you book.
Materials we work on in Freiston
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Freiston questions
How long does re-enamelling take?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
What happens once I’ve sent pictures?
We come back with a fixed quote. You’re under no obligation.
Are there extra charges for Freiston?
Travel is included in the price, and we charge the same wherever you are.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
The process
We agree an arrival time beforehand, so you’re not left guessing. Once we are there, the work takes a full day in most cases. The room is left tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Related advice
What bath re-enamelling costs
Prices start from £350. We don’t charge extra for travel to Freiston. The price depends on:
- How hard the colour is to match
- How easy the damage is to reach
- The material
- The type of damage
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
You can take the pictures on your phone. Just make sure we can see:
- The material, if you know it
- Your postcode, so we can check dates
- Natural light rather than flash
- Any earlier repairs or coatings
Most clients in Freiston get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, with the bath back in use the day after. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Freiston clients choose us
- Dust sheets down, tidy finish
- A year’s guarantee on all work
- No need to remove anything
- Colour-matched on site
Read our full price list and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Aftercare tips
Once the work has cured, treat it gently:
- Repair dripping taps early
- Have chips seen to early
- Dry the bath after use to stop limescale
- Keep toiletries on a shelf rather than in the bath
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
