West Lothian · Scotland
Bath re-enamelling & resurfacing in Calderwood, West Lothian
Full bath re-enamelling and resurfacing at your home in Calderwood, with a one-year guarantee on every repair.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Calderwood. The price depends on:
- How hard the colour is to match
- How many areas need work
- The type of damage
- How easy the damage is to reach
Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from pictures
Phone photos are fine, there’s no need for anything special. Make sure they show:
- Any details about the material
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
For a price in Calderwood, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
About our bath re-enamelling in Calderwood
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We work on basins & shower trays, cast iron baths and pressed steel baths, and people most frequently call us about a bath that stays dull however much you clean it and wear marks under the taps.
All of our repairs are guaranteed for twelve months in Calderwood and everywhere else. If something goes wrong with the work, we come back.
- Location
- Calderwood (EH53, EH27, EH52)
- Region
- West Lothian
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
About Calderwood
Calderwood is about 3 miles east of Livingston, in West Lothian. We visit homes and businesses in Calderwood and the surrounding area, so nothing has to leave your home. Calderwood is one of 58 towns and villages in West Lothian where we work. We work right across the region, from Calderwood to Edinburgh (about 10 miles away).
Postcode districts we cover here: EH53, EH27 and EH52. From Young Road, Sheil Lane and Beech Lane or a nearby road, we can come to you. Other places close to Calderwood include West Clifton (1 mile north-east), Wilkieston (1 mile east), Linburn (2 miles east), Pumpherston (2 miles west) and Broxburn (3 miles north-west). We also work in nearby towns such as Livingston (3 miles west), Bathgate (7 miles west), Linlithgow (8 miles north-west), Whitburn (10 miles west), Armadale (10 miles west) and Ladywell (3 miles west). Calderwood is among the bigger towns we cover in West Lothian.
Landmarks near Calderwood
Our customers here include homes close to East Calder Parish Church, East Calder and Our Lady's High School and the streets around them. The closest station to Calderwood is Kirknewton station, about 1.1 miles south-east of the centre. Nearby you will also find The Centre (2.9 miles south-west) and Linburn Centre (1.6 miles east). Not far away are Dundas Loch and Dechmont Law.
What we’re called out for in Calderwood
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
The most common problems we are called about are:
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
Comparing quotes
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- Who will actually do the work
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Honest limits
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Do not leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- Do not let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Places near Calderwood
Other services in Calderwood
Common questions in Calderwood
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Are there extra charges for Calderwood?
Travel is included in the price, and we charge the same wherever you are.
How long will the bath be out of use?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We clean up when we’re done and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Calderwood
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- A year’s guarantee on all work
See our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
