Wolverhampton · England

Bath Re-enamelling for Calf Heath homes

Full bath re-enamelling and resurfacing in Calf Heath, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Calf Heath

Repair or replace: which is better?

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Calf Heath. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Calf Heath

  • Free fixed quotes from pictures
  • CHAS, Constructionline and SafeContractor accredited
  • Everything repaired in place
  • We leave the room as we found it

Read our full price list or resurfacing vs replacement cost guide.

About our bath re-enamelling in Calf Heath

Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Whether it’s wear marks under the taps and stains that won’t shift, we can normally put it right, on cast iron baths, pressed steel baths and Victorian roll-tops alike.

The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.

Where
Calf Heath (WV10)
Area hub
Wolverhampton
Guarantee
A year, on every repair
Quote
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Where we work around Calf Heath

Calf Heath is about 4 miles west of Cannock, in Wolverhampton. Across the WV10 area, we carry out the work at your property. Our technicians cover all 96 towns and villages in Wolverhampton. You can also see our page for Birmingham, about 17 miles away.

Here we cover the WV10 postcode area. Streets in the area include Stable Lane, Woodlands Lane and Straight Mile, all of which we cover. We also cover the places around Calf Heath: Latherford (1 mile south), Great Saredon (1 mile east), Four Crosses (1 mile east), Shareshill (2 miles south) and Wedge's Mills (2 miles east). We also work in nearby towns such as Wolverhampton (6 miles south), Bilston (8 miles south), Coseley (10 miles south), Wednesfield (5 miles south), New Invention (5 miles south-east) and Gornal (11 miles south).

Landmarks near Calf Heath

We visit homes around The Rural Enterprise Academy. For rail, the closest station is Cannock station, roughly 3.2 miles east of the centre. Further afield, we also cover the area around Cheslyn Hay North and Saredon (1.9 miles east) and Cannock Chase Hospital (3 miles east).

Map of Calf Heath © OpenStreetMap contributors

Keeping it looking good

Aftercare is simple:

  • Get any chip repaired quickly
  • Do not let dyes or oils sit on the finish
  • Stick to gentle, non-abrasive cleaners
  • Wipe the bath dry after use in hard water areas

Wipe the bath dry after use where you can, and rinse away any product left on the surface.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

The process

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes most of the day. At the end we talk you through how soon it can be used and how to look after it.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Tell us about parking, stairs or access
  • Move bottles, mats and clutter away from the area

Ask for a price

For a price in Calf Heath, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Related advice

Calf Heath questions

How do I book?

Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

What happens if you find more damage?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Do you resurface freestanding baths?

Yes, frequently. We resurface the inside, and the outside can be refinished too.

Can you resurface a pink bath in white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

How much does bath re-enamelling cost in Calf Heath?

Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can I fix it myself?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

How we price bath re-enamelling

Prices start from £350. Prices are worked out job by job, from your photos. What matters most is:

  • Whether old repairs or coatings need taking off
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear
  • What the surface is made of

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Quotes from your pictures

We price nearly every job from pictures. This is what we need:

  • Something in shot to show the size
  • Natural light rather than flash
  • The material, if you know it
  • One sharp close-up of the damage

To get a price, send a couple of photos through our quote form or call us. We will tell you honestly if a repair is the right fix.

What a repair can’t fix

To be straight with you, some problems need a different fix:

  • Holes rusted through the metal
  • A bath split right through the body
  • Leaks from fittings rather than the bath

If in doubt, send photos and we’ll say what we think before booking.

Materials we repair

  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays

Landlords, agents and businesses in Calf Heath

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.