Wolverhampton · England
Bath Re-enamelling in Latherford
We travel to Latherford for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
Bath re-enamelling in Latherford, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We regularly repair basins & shower trays, acrylic baths and cast iron baths, and common reasons people get in touch are a coating lifting around the plughole and lots of chips and rust spots.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Latherford (WV10)
- County
- Wolverhampton
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Everything repaired in place
- No extra charge for your area
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
Take a look at our full price list and guide to resurfacing and replacement costs.
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Whether we combine several jobs
- The type of damage
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send pictures for a quote
Two or three clear pictures are normally enough. It helps if you send:
- A wider photo showing the whole bath
- A close-up of the damage, in focus
- Any details about the material
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Latherford questions
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Do you cover Latherford?
We do. We send a technician to Latherford for every job, with no extra charge for travel.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Don’t let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
- A dripping tap should be fixed promptly
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
How the visit works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a full day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Ensure the area is dry
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.
Advice
Where we work around Latherford
Latherford is about 4 miles south-west of Cannock, in Wolverhampton. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Latherford is one of 96 towns and villages in Wolverhampton where we work. You can also see our page for Birmingham, about 16 miles away.
Our visits in WV10 work the same way as everywhere else we cover. We also cover the places around Latherford: Calf Heath (1 mile north), Shareshill (1 mile south-east), Great Saredon (1 mile north-east), Featherstone (1 mile south) and Middle Hill (2 miles east). Larger places within reach include Wolverhampton (5 miles south), Bilston (7 miles south), Coseley (9 miles south), Wednesfield (5 miles south), New Invention (4 miles south-east) and Gornal (10 miles south).
Around Latherford
Around Latherford, we work in homes near Cheslyn Hay Sport and Community High School, Havergal CofE (C) Primary School and Church of St Mary and St Luke, among other places. The nearest railway station is Landywood station, about 3.1 miles east. A little further out are Cheslyn Hay North and Saredon (1.6 miles east) and Cannock Chase Hospital (3.1 miles north-east).
Landlord and trade work in Latherford
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Towns and villages near Latherford
Other services in Latherford
About our accreditations · Every repair comes with a one-year guarantee.
