Coventry · England
Bath Re-enamelling for Cannon Park homes
Bath re-enamelling for Cannon Park, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- An old resurfacing that is failing
- Stains that won’t shift
How we handle bath re-enamelling in Cannon Park
The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the day after. We’re frequently asked to fix lots of chips and rust spots and a coating lifting around the plughole, on acrylic baths, basins & shower trays and Victorian roll-tops.
You get a one-year guarantee, the same in Cannon Park as everywhere else we work.
- Area
- Cannon Park (CV4, CV5)
- County
- Coventry
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Nearby places to Cannon Park
What else we do in Cannon Park
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a full day. We clean up when we are done and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the next day.
How to prepare
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Any earlier repairs that need removing first
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can take the pictures on your phone. Just make sure we can see:
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- A wider photo showing the whole bath
- Natural light rather than flash
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
What we are called out for in Cannon Park
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we are asked about most:
- Brown or grey marks that do not clean off
- Worn patches where water runs and sits
- Chips and rust in more than one place
- A dull, rough surface that will not come clean
What to look for in a quote
- How the room is protected while they work
- Whether a trained technician does the job
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About Cannon Park
Cannon Park is about 3 miles south-west of Coventry, in Coventry. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 88 places in Coventry. Our jobs stretch from Cannon Park to Birmingham (15 miles away).
All of CV4 and CV5 is covered, from the main roads to the quietest streets. That includes homes on Shultern Lane, Ivy Farm Lane and Cannocks Lane. Close by, we cover Canley (1 mile south-east), Westwood Heath (1 mile west), Tile Hill (1 mile west), Green Lane (1 mile east) and Finham (2 miles south-east). We also work in nearby towns such as Coventry (3 miles north-east), Hillfields (3 miles north-east), Bishopsgate Green (3 miles north-east), Radford (3 miles north-east), Ernesford Grange (4 miles east) and Foleshill (5 miles north-east).
What’s near Cannon Park
Around Cannon Park, we work in homes near The Westwood Academy, Hearsall Common and Church of St John the Baptist, among other places. Also close by are The Sovereign pub (0.8 miles north-west) and Cannon Park Primary School (0.5 miles south-east). Cannon Park’s nearest station is Canley station, about 0.9 miles north. Further afield, we also cover the area around Allesley Castle (2.1 miles north) and Coventry Watch Museum (2.2 miles north-east). Not far away are Oxpen Meadow Lake.
Repair or replace in Cannon Park?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- One price list for the entire UK
- One-year guarantee on every repair
See our pricing and resurfacing vs replacement cost guide.
What we can’t put right
We’ll always be straight with you, so here’s what a repair won’t do:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Common questions in Cannon Park
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you work in Cannon Park?
We do. Repair technicians travel to Cannon Park from across the region, with no extra charge for travel.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you quote from photos?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
About our accreditations · Every repair comes with a one-year guarantee.
