Coventry · England
Bath re-enamelling & resurfacing in Finham, Coventry
Bath re-enamelling for Finham, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- An old resurfacing that’s failing
What affects the price in Finham
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- The colour and finish to match
- What kind of damage it is
- The material
- Whether old repairs or coatings need taking off
Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- Natural light rather than flash
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- One sharp close-up of the damage
If you’re in Finham and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
About our bath re-enamelling in Finham
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on basins & shower trays, cast iron baths and pressed steel baths, and people most frequently call us about thin, worn enamel in places and a peeling or bubbling previous coating.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Finham (CV3, CV8)
- County
- Coventry
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
It helps to know what we cannot do:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Repair or replace in Finham?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why Finham customers choose us
- We come to you, anywhere in the UK
- No extra charge for your area
- A fixed quote before booking
- A year’s guarantee on all work
Read our full price list or bath cost comparison.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. It normally takes most of the day, and we will tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Keep children and pets away from the room on the day
- Make sure the area is dry
- Tell us about any previous repairs or coatings
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Read more
Signs you need bath re-enamelling in Finham
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Send us a photo if you notice any of these:
- An outdated colour you’d like to change
- Several chips and rust patches
- A bath that stays dull however much you clean it
- Stains that won’t shift
Comparing quotes
- How the room is protected while they work
- Who turns up on the day
- What prep work is covered
- If travel is included in the price
Towns and villages near Finham
What else we do in Finham
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Do not use the bath until it has fully cured
- Never use suction bath mats
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Covering Finham
Finham is about 3 miles south of Coventry, in Coventry. Clients in Finham get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Finham is one of 88 towns and villages in Coventry we cover. Our nearest city page is Birmingham, about 17 miles away.
We cover every part of CV3 and CV8. From Green Lane, Howes Lane and Daleway Road or a nearby road, a technician can come to you. We also cover the places around Finham: Green Lane (1 mile north-west), Stivichall (1 mile north-east), Cheylesmore (1 mile north), Stoneleigh (1 mile south) and Canley (2 miles north-west). We also work in nearby towns such as Coventry (3 miles north), Hillfields (3 miles north), Bishopsgate Green (3 miles north), Radford (3 miles north), Ernesford Grange (3 miles north-east) and Foleshill (5 miles north-east).
What’s near Finham
We visit homes around Finham Park School, War Memorial Park and Church of Saint John the Baptist, among other places. The closest station to Finham is Coventry station, about 1.9 miles north of the centre. Other landmarks nearby include Aircraft Radio Museum (1.7 miles east) and Ford's Hospital (2.3 miles north). For a walk, there is Ryton Wood Meadows and Oxpen Meadow Lake.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
FAQs for Finham
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
What happens once I’ve sent photos?
We come back with a fixed price, usually with dates to choose from. There is no obligation to book.
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
About our accreditations · Every repair comes with a one-year guarantee.
