Nottinghamshire · England
Bath Re-enamelling for Carburton homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Carburton. Free, fixed quotes from your photos.
- Resurfacing from £350
- Thin, worn enamel in places
- Lots of chips and rust spots
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why Carburton clients choose us
- Rooms protected and left tidy
- CHAS and Constructionline accredited
- We’ll tell you if it’s not worth repairing
- Colour mixed on the day to match
Take a look at our prices page and resurfacing vs replacement cost guide.
About our bath re-enamelling in Carburton
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a dull, rough surface that won’t come clean and chips and rust in more than one place, we can usually put it right, on acrylic baths, pressed steel baths and cast iron baths alike.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Carburton (S80)
- Region
- Nottinghamshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Avoid suction-cup mats
- Get any chip repaired quickly
- Do not use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Also near Carburton
Other services in Carburton
Do you need bath re-enamelling in Carburton?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Signs it’s time to call us include:
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
What your quote should include
- Whether the price covers travel
- What happens if they find more damage
- What prep work is covered
- What the guarantee covers, and for how long
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Covering Carburton
Carburton is about 5 miles south of Worksop, in Nottinghamshire. Across the S80 area, a technician comes to you. We cover 329 places in Nottinghamshire, from the larger towns to small villages. We work right across the region, from Carburton to Leeds (about 43 miles away).
Every address in S80 is covered. Jobs here include addresses on Piper Lane and Ollerton Road and the roads around them. Neighbouring places we cover include Budby (2 miles south), Norton (3 miles west), Meden Vale (3 miles south-west), Perlethorpe (3 miles south-east) and Cuckney (3 miles south-west). Within a short drive, we also cover Mansfield (9 miles south-west), Worksop (5 miles north), Sutton in Ashfield (11 miles south-west), Retford (8 miles north-east), Mansfield Woodhouse (7 miles south-west) and Kirkby-in-Ashfield (13 miles south-west).
Landmarks near Carburton
Typical jobs here are in homes near St Giles Church and Clumber Park, among other places. For rail, the closest station is Worksop station, about 4.3 miles north of the centre. A little further out are Norton and Cuckney (2.8 miles west) and Bassetlaw Hospital (4.6 miles north). Not far away are Budby South Forest RSPB reserve and Sandhill Lake.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Landlords, agents and businesses in Carburton
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
What we can’t put right
We’ll always be straight with you, so here’s what a repair can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
What we do, step by step
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. It normally takes a full day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Make sure the area is dry
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
Ask for a price
Most clients in Carburton get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Your questions about bath re-enamelling in Carburton
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you cover the whole of Nottinghamshire?
Across the UK. Prices do not change with location.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote and the next dates we have.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How long is the bath unusable?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How much does bath re-enamelling cost in Carburton?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your S80 postcode.
About our accreditations · Every repair comes with a one-year guarantee.
