Nottinghamshire · England
Bath Re-enamelling for Meden Vale homes
We travel to Meden Vale for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Chips and rust in more than one place
- An outdated colour you’d like to change
Bath re-enamelling at your home in Meden Vale
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair acrylic baths, pressed steel baths and basins & shower trays, and the jobs we see most are brown or grey marks that don’t clean off and a dull, rough surface that won’t come clean.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Meden Vale (NG20)
- County
- Nottinghamshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs straight away
- Leave the bath for the full curing time before using it
- Never use suction bath mats
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Nearby places to Meden Vale
What else we do in Meden Vale
Questions from Meden Vale
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How much does bath re-enamelling cost in Meden Vale?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you quote from photos?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
What bath re-enamelling costs
Resurfacing from £350. There’s no area surcharge for Meden Vale. The price reflects:
- How hard the colour is to match
- What kind of damage it is
- What the surface is made of
- How many items we do on one visit
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Most quotes are done from photos alone. To help us price it:
- Any earlier repairs or coatings
- The material, if you know it
- A picture taken from further back
- Good light, ideally daylight, without flash glare
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Where we work around Meden Vale
Meden Vale is about 4 miles north-east of Mansfield Woodhouse, in Nottinghamshire. We visit homes and businesses in Meden Vale, so you do not need to take anything anywhere. We cover 329 places across Nottinghamshire, from the larger towns to small villages. Our nearest city page is Leeds, about 44 miles away.
Our visits in NG20 work the same way as everywhere else we cover. From Laxton Drive, Carburton Avenue and Marston Avenue or anywhere nearby, a technician can come to you. We also travel to Church Warsop (1 mile south-west), Cuckney (1 mile north-west), Market Warsop (1 mile south-west), Norton (1 mile north) and Warsop Vale (2 miles south-west). Further out, we also cover Mansfield (6 miles south-west), Worksop (7 miles north), Sutton in Ashfield (8 miles south-west), Hucknall (13 miles south), Retford (10 miles north-east) and Mansfield Woodhouse (4 miles south-west).
Local landmarks in Meden Vale
Locally, our jobs take us to homes close to Meden School, St Peter and St Paul's Church and Netherfield Infant School (Welbeck Federation of Schools), among other places. Meden Vale’s nearest station is Shirebrook station, roughly 3 miles south-west of the centre. A little further out are Budby Castle (2.6 miles east) and Norton and Cuckney (1.4 miles north-west). The countryside around Meden Vale includes Budby South Forest RSPB reserve.
For landlords and businesses
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs in Nottinghamshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
When to call us in Meden Vale
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Keep an eye out for these signs:
- An outdated colour you’d like to change
- Lots of chips and rust spots
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
What to look for in a quote
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
- Who turns up on the day
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
What you get with us
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
- A year’s guarantee on all work
Read our prices page and resurfacing vs replacement cost guide.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the next day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
Get a quote
If you are in Meden Vale and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
