Kent · England
Bath Re-enamelling for Chillenden homes
Problem with your bath in Chillenden? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- An outdated colour you’d like to change
Bath re-enamelling in Chillenden, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We’re often asked to fix brown or grey marks that don’t clean off and a dull, rough surface that won’t come clean, across acrylic baths, pressed steel baths and basins & shower trays.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Location
- Chillenden (CT3)
- County
- Kent
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Chillenden. The price reflects:
- Doing more than one item at once
- How many areas need work
- What kind of damage it is
- Access to the area
Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
Photographing the damage takes a minute. Try to send:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- The material, if you know it
- The postcode, so we can plan the visit
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Landlords, agents and businesses in Chillenden
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Landlords, letting agents and housing providers in Chillenden use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Chillenden and nearby
Chillenden is about 6 miles west of Deal, in Kent. Clients in Chillenden get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Chillenden is one of 922 places in Kent where we work. We work right across the region, from Chillenden to London (about 61 miles away).
Jobs in CT3 work the same way as everywhere else we cover. We also cover the places around Chillenden: Goodnestone (1 mile north-west), Nonington (1 mile south-west), Heronden (2 miles east), Barnsole (2 miles north) and Hammill Park (2 miles north-east). Larger places within reach include Canterbury (8 miles west), Margate (11 miles north-east), Dover (7 miles south), Folkestone (11 miles south), Ramsgate (10 miles north-east) and Broadstairs (12 miles north-east).
Local landmarks in Chillenden
Our customers here include homes close to Church of All Saints and Goodnestone Church of England Primary School, among other places. The closest station to Chillenden is Aylesham station, about 1.9 miles west. For a walk, there’s Monk's Wall nature reserve.
How it works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes most of the day. The room is left tidy and you’ll know when it can be used.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
How to prepare
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
Getting a price
Email us a photo of the damage and one of the whole item, with your CT3 postcode, and we will reply with a fixed quote.
Read more
Keeping it looking good
Aftercare is simple:
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Have chips seen to early
- Don’t let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Towns and villages near Chillenden
Also in Chillenden
When we’d advise against a repair
A repair isn’t right for every job, including:
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Send us photos and we’ll tell you honestly.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
FAQs for Chillenden
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Which areas do you work in?
All of Kent, and the rest of the UK. There is no extra charge for travel.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens next?
We review the photos and send a fixed quote.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Do you need bath re-enamelling in Chillenden?
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Send us a picture if you notice any of these:
- Wear marks under the taps
- An old resurfacing that’s failing
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
Comparing quotes
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- How the room is protected while they work
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
