Kent · England
Bath re-enamelling & resurfacing in Goodnestone, Kent
Full bath re-enamelling and resurfacing for homes and businesses in Goodnestone and across Kent. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change

Bath re-enamelling at your home in Goodnestone
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on Victorian roll-tops, basins & shower trays and acrylic baths, and the jobs we see most are a coloured bath you want in white and worn patches where water runs and sits.
Your repair is guaranteed for a year, as with every job we do.

- Where
- Goodnestone (CT3)
- County
- Kent
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Nearby places to Goodnestone
Also in Goodnestone
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Goodnestone. What changes the price is:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Send pictures for a quote
We price nearly every job from pictures. This is what to send:
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- One picture of the entire bath
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Covering Goodnestone
Goodnestone is about 7 miles east of Canterbury, in Kent. Whether you are in the middle of Goodnestone or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 922 places in Kent. You can also see our page for London, about 60 miles away.
Here we cover the CT3 postcode area. Whether you live on The Street, Saddlers Hill and Fitzwalters Meadow or anywhere nearby, a technician can come to you. Other places close to Goodnestone include Chillenden (1 mile south-east), Twitham (1 mile north), Well Head (1 mile north), Ratling (1 mile south-west) and Staple (2 miles north-east). Within a short drive, we also cover Canterbury (7 miles west), Margate (11 miles north-east), Dover (8 miles south), Folkestone (12 miles south), Ramsgate (10 miles north-east) and Broadstairs (12 miles north-east).
Landmarks near Goodnestone
Our clients here include homes close to Goodnestone Church of England Primary School, Church of the Holy Cross and The Fitzwalter Arms and the streets around them. The nearest railway station is Adisham station, about 1.5 miles west of the centre. Further afield, we also cover the area around St Martins Hospital (5.7 miles west).
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Wash away dyes and oils after use
- Don’t use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Questions from Goodnestone
How much does bath re-enamelling cost in Goodnestone?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you cover the whole of Kent?
All of Kent, and the rest of the UK. There is no extra charge for travel.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Landlord and trade work in Goodnestone
Landlords, letting agents and housing providers in Goodnestone use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What we do, step by step
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take the best part of a day, tidy-up included.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Open a window if you can
- Ensure the area is dry
- Keep a parking space free if you can
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Read more
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Why us?
- Fixed prices from your photos
- No extra charge for your area
- We’ll tell you if it’s not worth repairing
- Work done at your home or business
Read our pricing and bath cost comparison.
Signs you need bath re-enamelling in Goodnestone
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- Brown or grey marks that do not clean off
- Several chips and rust patches
- A bath in a colour that no longer suits
- Thin, worn enamel in places
What to look for in a quote
- Who turns up on the day
- What the guarantee covers, and for how long
- How soon you can use it again
- Whether they match the colour on site
About our accreditations · Every repair comes with a one-year guarantee.

